According to Jiuzheng Building Materials Network, custom furniture has become popular in recent years, which is undoubtedly to cater to consumers' full use of limited home space and personalized needs. Customized furniture can make full use of the space at home on the one hand, and can satisfy the young people's pursuit of individual life on the other hand, but if you neglect the use of the living space and the family's living habits, it will be self-defeating. So how should the custom furniture be maintained?
1, daily cleaning with a feather duster gently dust off, if accidentally contaminated, should be cleaned with a clean soft cloth. Never use a hard object to wipe the surface. Do not allow acid, alkaline chemicals, etc. to contact the surface.
2, to avoid dragging small pieces of furniture when you need to move, to lift the bottom of the furniture, large pieces of furniture is best to ask professional companies for help.
3, should maintain the appropriate temperature and humidity in the room, so as not to cause shrinkage and cracking of furniture parts.
4, drawers and door rails and other mobile hardware accessories should be regularly added some lubricants.
5, regularly open the furniture cabinet door, drawers, take out the items, make them ventilate, dehumidification.
6, to avoid long-term exposure to furniture in the sun, or close to the heating stove, fireplace.
7. Regularly check the firmness of the hinges, slide rails, eccentric parts and other hardware, and find that the looseness is fixed immediately.
8. If you are unable to handle it yourself, please consult or repair the store.
HHCMS-200 Carbon Molecular Sieve
CMS-200 is a new kind of non-polar adsorbent specially designed for extracting nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable feature of the carbon molecular sieve is its high gas-producing efficiency, especially the preparation of nitrogen with a purity of less than 99.5%.
It is widely used in large air nitrogen making equipment.
Project parameters
The diameter of:1.0-1.3 1.3-1.5
Packing density:≥660kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
The adsorption time of test condition was 58s with an average pressure of 1-2s
|
Adsorption pressure |
Nitrogen purity (%) |
Yield (Nm3/ h.t.) |
Nitrogen recovery rate |
|
0.8MPa |
99.9 |
120 |
30 |
|
99.5 |
200 |
37 |
|
|
99 |
250 |
41 |
|
|
98 |
310 |
45 |
|
|
97 |
370 |
47 |
|
|
96 |
420 |
50 |
|
|
95 |
490 |
55 |
|
|
0.6MPa |
99.9 |
95 |
31 |
|
99.5 |
160 |
38 |
|
|
99 |
200 |
43 |
|
|
98 |
245 |
46 |
|
|
97 |
300 |
49 |
|
|
96 |
335 |
51 |
|
|
95 |
390 |
56 |
Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
Carbon Molecular Sieve HHCMS-200
Carbon Molecular Sieves CMS200,Molecular Sieve Application,Hhcms Carbon Molecular Sieve,Molecular Sieves Adsorption
Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com