Generally, the shaft type workpiece is clamped by the spindle and the tailstock top positioning, and the axial dimension is not easy to control due to the different sizes of the center holes at both ends of the spoke. Therefore, we designed the fixture to overcome the above shortcomings. The clamp mandrel 2 (drawing) is directly placed in the taper hole of the lathe main shaft, the tip 4 is floating, and is freely expandable and contractible in the mandrel, and the spring force of the spring 3 is adjusted by adjusting the position of the screw 1. When the lathe main shaft rotates, the bearing housing 7 and the guide ring 10 do not rotate under the action of the brake lever 8. Replacing the guide ring 10 of different inner diameters can clamp shaft workpieces of different diameters. The workpiece is forced by the tip of the tailstock (not shown) to force the tip to inward.
Semi Inset Basin Tops
Semi Inset Basin Tops,Inset Basin Tops,Best Semi Inset Basin Tops,Semi Inset Basin Tops For Sale, Semi Inset Basin with Overflow
Colour: Gloss White
32mm Waste With Overflow / 32mm Waste Without Overflow
Tap Hole: 1TH / 0TH
Material: Porcelain
Supply Ability: 15000 Piece/Pieces Per Month
Place of Origin: Chaozhou, China
Customization: Customized Logo(Min. Order: 30 Pieces)
Customized Packaging(Min. Order: 30 Pieces)
FOB: Shenzhen
Shipping: Support Express · Sea Freight · Land Freight · Air Freight
After-sale Service: Online Technical Support,
Project Solution Capability: Graphic Design, Total Solution For Projects
Semi Inset Basin Tops,Inset Basin Tops,Best Semi Inset Basin Tops,Semi Inset Basin Tops For Sale, Semi Inset Basin with Overflow
Duraplex Limited , https://www.duraplex.com.cn