In the past people's inherent concept, entering the winter is not suitable for construction. If you look at the problem from another perspective, it is suitable for renovation all year round. why? Because there is a big difference in the degree of greenhouses throughout the year. The phenomenon of shrinking, swelling, arching, and cracking of furniture, doors and windows, walls, and floors that occurred during the change of seasons did not occur only during the winter construction.
>>> Links: Winter Furniture Adds Clothes to Homes “Rising Warmerâ€
Seven issues to note in winter decoration:
First, the main materials used in the decoration, especially wood, should be prepared in advance, it is best to place in the heating equipment room for 3 to 5 days to evaporate the moisture due to temperature changes, so that the wood moisture content close to the house The level to avoid deformation after renovation.
Second, the sand should be carefully sifted, there can be no ice. Some anti-freezing agents can be properly added according to the actual construction requirements. When stirring the mortar, the temperature of the water cannot exceed 80°C. The cement cannot be used in open-air construction and anti-freezing should be done.
Third, putty can not be too thick. Because the indoor air is dry, the water loss is faster, otherwise it is easy to cause emptying, cracking, and wall inequality.
Fourth, winter temperature difference between indoor and outdoor, whether it is wall tiles or floor tiles, must be used to adapt to the indoor temperature can be paved, so as to avoid construction after the phenomenon of emptying, shedding, in addition, brick paving should also pay attention to timely .
5. The oiler shall spray the paint in strict accordance with the temperature in the product description. The ambient temperature of the paint application shall not be lower than 5°C, and the ambient temperature when the varnish is applied shall not be lower than 8°C. Live to pay attention to "warmth", fully dry and then open the doors and windows ventilation.
Sixth, indoor environment detection found indoor air pollution in winter interior decoration is very serious, some families, office buildings and even decoration workers suffering from harmful gas trouble every winter poisoning incidents occur, so must pay attention to the decoration of the air quality.
Seven, winter construction should pay attention to leave an appropriate gap
1. The door joint should not be too small during construction in winter so as to prevent the summer door from being tight and cannot be opened and closed freely;
2, when paving solid wood flooring, around 2 mm of expansion joints should be set aside, otherwise it will cause a drum, dangling phenomenon;
3, when doing furniture, need to leave about 0.1 mm seams to avoid deformation;
4. For the occurrence of cracks due to different material cold shrinkage factors, the construction personnel should take measures to reserve joints for prevention and control. The joints of all wooden products shall be controlled at 1 mm, and the joints of gypsum board and cement board shall be controlled at 8 mm.
Entrance decoration decoration company furniture coating window cement home floor tile decoration home
DIN Flanges are circular flanges for pipes, valves, fittings, and accessories. There are DIN Standard Flange,DIN2566 Threaded Flanges,DIN Plate Flanges.
DIN Flanges,DIN Standard Flange,DIN2566 Threaded Flanges,DIN Plate Flanges
Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.znforged.com