>>> Comparison of uses and advantages and disadvantages of various plates
Wu Jun (a pseudonym), the individual owner of the Guanzhuang sheet market in Beijing, has a small reputation in the sheet metal wholesale industry in Beijing. In an interview with reporters, he asked to hide his real name.
As long as they can make money, no one will have any problem with the boards they have approved.
"Everyone who sells boards in Beijing can not even write his own name. As long as he can make money, no one will have problems with the board he has approved." Wu Jun said, "I think I've been doing so for so many years. Also earned, should come out and tell the truth."
"On the board in the Beijing market, 80% of the glue is not qualified," he said.
Wu Jun said that the non-conformity is not in line with the state of the formaldehyde content of artificial panels used for interior decoration mandatory standards.
Wu Jun not only did sheet metal wholesale, but also registered a wood company and commissioned other companies to produce it. He told reporters that he spent a lot of time looking at the problem of glue used in the plates.
"The problem of plastics, raw material formula is on the one hand, and the more important is the mastery of the reaction process and time. Prior to 2003, domestic plastics used for sheet metal were high formaldehyde content adhesives, and the production of low formaldehyde adhesives was only 3 years. 80% of the plastics companies do not have the same technology, although the formaldehyde content is reduced, but the adhesive strength is not enough, the market reflects back, the board is easy to crack, so the plastics companies have to increase the formaldehyde content. The production technology is still in the hands of foreign-funded plastics manufacturers, so the price is difficult to lower." He said, "So if four (formaldehyde content, bonding strength, transverse statics, moisture content) at the same time difficult to pass, currently in the Beijing market There are only 5% of the total four qualifying boards."
It's easy to do something on the test
Since the country has mandatory standards, market vendors must also provide product testing reports. Wu Jun said: "There is no point in buying a plate to see the test report. It is a device."
He smiled and said: "Today's detection problem is really who knows who knows! It's easy to do something on the test."
He said, "even if the test report is true, the test data are in line with national standards, but the accuracy of the test is a problem. I have to send the same batch of samples to five in order to find out whether their plates really meet the national standards. The testing organization tested it, but it came up with five different test results.Even I do not believe, people who buy the board believe it has what use?Product inspection is not only a troublesome thing, but the cost is not low, although the detection department Accept inspections from any organization or individual, but consumers are not allowed to submit their own inspections. Even the industrial and commercial quality inspections may not reflect the quality of the plates, because sample inspections often only look at part of the store, and spot checks are also difficult. Really because many big vendors don't have just one warehouse."
So all the tests are not true? When the reporter asked this question, he said that through the testing results of so many testing organizations, it was considered that the National Testing Center for Wood Based Panels was relatively accurate. He told reporters that in general, test reports on brand-name products are relatively credible.
Brand-name companies also do low-end board
On June 19, the Beijing Municipal Bureau of Industry and Commerce announced the results of recent spot inspections of interior decoration products. 67 unqualified products, including “Golden Autumn†floors, were suspended from sales in the Beijing market. Among the 67 kinds of unqualified products, Hebei Jinqiu Wood Industry Co., Ltd. produced “Jinqiu†red cherries decorated with excessive formaldehyde. The Beijing Municipal Bureau of Industry and Commerce stated that these unqualified products will be withdrawn from the Beijing market and their operators will also be punished. After the rectification of the production company, the goods can be re-entered in Beijing after being re-inspected.
In this regard, Wu Jun said, "This is not a news in the industry any longer. So I just said that brand-name products are only relatively credible. The level of formaldehyde found in excess of this standard is only a corner of the problem of brand-name companies. More important Yes, brand-name companies also participate in making low-grade plates."
He analyzed that in the current fierce market competition and profit pressure, brand-name companies have to reduce their identities in the low-end market competition. Although the quality of high-end products of famous brand companies is excellent, due to the current environmental awareness of consumers has not yet been universally popularized, the level of consumption is generally not high, and the low-end market still dominates, while the high-end products of high-end brand-name companies are high in cost and sales volume, even if the profits Even higher, but the total amount is difficult to maintain the normal operation of high-cost management and large-scale production. Therefore, high-end products create an image and low-end products create profits. Brand-name low-end products and other products in the market are almost the same, and some are not as cheap as other ordinary manufacturers. So he advises consumers not to superstition brand names.
E0 level: manufacturers and businesses are playing concept?
The reporter's investigation found that there are three standards of E0, E1, and E2 plates in the Beijing market. The standard states that formaldehyde emission is E2 level ≤ 5mg/l and E1 level is ≤ 1.5mg/l. Sellers and some manufacturers all claim that the formaldehyde content of E0 sheet is ≤ 0.1mg/l, which is the most environmentally friendly sheet. Moreover, according to media reports, a floor company also claimed to have ownership of the E0 trademark, and asked other floor companies to stop production and sales of floors with the E0 mark. It also sparked a controversy over whether "E0" is a trademark or a common standard, even Experts concerned have considered the need to incorporate the E0 level as a mark of the formaldehyde limit level for laminate flooring into the newly revised national standard.
Wu Jun said, "E0 is completely deceptive, E0 only manufacturers and businesses playing concept, the current national standards only E1, E2 level, and no E0 level, some manufacturers and sellers said that this is higher than the country Standard industry standards, in fact, people in the industry all know that the standards of formaldehyde levels E1 and E2 currently being implemented in the country are already very high. They are based on the latest European environmental standards of the same kind, as long as they can effectively meet these two standards. This level of formaldehyde will not cause any harm to human health, and the so-called E0 level has little practical significance."
He pointed out that the use of formaldehyde-free blockboards bonded with natural plants as raw materials in the market now provides a direction for the sheet metal industry in environmental protection.
According to a reference price of blockboard purchase announced by the China Consumers Association and the China Forest Product Industry Association in a white paper published in the White Paper on Production and Consumption of Blockboards in China, the reference price for a 15-mm-thick E1 blockboard market is 90. More than yuan, E2 level reference price of 85 yuan or more; 18 mm thick blockboard E1 market reference price of 95 yuan, E2 level reference price of 90 yuan.
Not invoicing is a Beijing practice
Wu Jun revealed that “the industry practice in Beijing plate market is not to issue votes. Most of the wholesalers and retailers of plates in Beijing are operating as individual industrial and commercial households. This way, there is no need for a series of accounting and cashiers. The tedious process, no matter how much business, only need cash to exchange; Second, to avoid the business tax, because industrial and commercial self-employed households are fixed tax, self-employed households in Beijing to sell the plate fixed tax is generally 20,000 yuan per year.
However, he said that this so-called practice is actually a kind of narrow commercial bad habit. Although the motive for tax avoidance is understandable, from a long-term perspective, the professionalization of sellers is the inevitable direction of the development of the industry.
Since then, the reporter has visited nearly 10 large-scale building materials markets in Beijing. When reporters asked for invoices to purchase plates, the dealers really said that they could only open triple receipts. If they really need an invoice, they must allow customers to pay the invoice tax amount, or no. Discount sales.
Panel purchase formaldehyde door price decoration company decoration interior decoration
Paper Testing Equipment,Cobb Water Absorption Tester,Folding Endurance Testers,Digital Thickness Tester
Dongguan Hengke Automation Equipment Co., Ltd. , https://www.hengkeinstrument.com