Rubber sleeve cable product classification and application range

The rubber sheathed cable is a kind of soft and movable cable type which is made of multiple strands of fine copper wire as the conductor and is outsourced of rubber insulation and rubber sheath. It is widely used in various electrical equipments. During the production process of rubber cable , appearance defects often appear, such as the surface is not smooth; surface of clinker particles (early vulcanized rubber particles) or impurities; wire and cable surface scratches, scratches; surface collapse; surface hemp pattern Wait. There are five common causes of appearance defects on rubber sheath cables.

Rubber cable - concept

After a single heat molding, most of them are used in mobile electrical equipment because of their unique softness.

Rubber Jacket Cables - Classification

Including: Medium-sized rubber sheathed flexible cable, waterproof rubber sheathed flexible cable, and YHD cable used for tin-plated power cable for field use.

  

Rubber Jacket Cables - Applications

Waterproof and submersible pump cables: for submersible motors.

Cables for radio equipment: basically meet the requirements.

Photography cable products: with the development of new light sources.

  

Rubber Cables - How to Repair

First, equipment

Automatic temperature control, timing and small size pressure equipment with multi-size tubular cavity.

Second, rubber

It is consistent with the wire used to make up the wire, and contains more glue than the material being filled. The vulcanization system is slightly stronger.

Third, the operation method

1, set the temperature and time.

2, using ink thinner to wash repair.

3, according to the size of the gap to cut the amount of repair rubber.

4. Plug the cut rubber into the gap.

5, wrapped with high temperature PP tape.

6, until the vulcanization time, remove the product.

Fourth, the verification method

Press air into the filled wire and place it in water for leaks.

  

Rubber sheath cable - appearance defects

1, the mold mouth is not smooth, the aperture is too large, the plastic material such as plastic.

2, rubber impurities, scorch time is too short, the screw is not smooth, viscose and so on.

3, no chamfer, impurities or rubber particles blocking die mouth.

4, die set hole diameter is too large, rubber plasticity is small, poor viscosity, etc.

5, die set aperture is too small, filled with gaps in the core gap.

Editor's summary: The above is a brief introduction of the classification and application scope of rubber cable products. We hope to help friends who have this requirement! For more details on prices, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase your favorite product on Qijia Mall!

Rubber cable

Graphite Electrodes mainly use needle coke, petroleum coke, as raw material, coal pitch as binder, calcination, ingredients, kneading, molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, Graphite Electrode with low resistivity, graphite electrode good conductivity, graphite electrode low ash, graphite electrode uniform and compact structure, good oxidation resistance, high mechanical strength, etc.

Uhp 700 Graphite Electrode

Uhp 700 Graphite Electrode,Iran Graphite Electrodes,Turkey Graphite Electrodes,Brazil Graphite Electrodes

Carbographite Industrial PTE.LTD , https://www.carbographite.com