1. Wood furniture should be used after 7 days of painting of water-based wood lacquer; at the same time, indoor air circulation should be maintained, temperature and humidity should be suitable to ensure the normal hardness of the paint film on the surface of wood furniture.
2, water-based wood paint brushed furniture can withstand the high temperature of the water cup, but should not be close to the stove and heaters and other heaters, so as not to cause high temperature baking caused wood furniture deformation, resulting in cracking or even falling off the surface of the paint film.
3. If there is a glass countertop, the cotton tablecloth should be placed underneath. It is not advisable to place the paper or plastic film directly. Otherwise, the paper or plastic film will adhere to the paint film and damage the paint film.
4, wood furniture surface paint film should always be wiped with soft gauze, reduce dust and smudge, and regularly wipe with car polishing wax or floor wax, can make the surface paint film as bright as new.
5, try to avoid exposure to high concentrations of chemical agents, so as not to damage the paint film.
6, wood furniture surface beware of hard objects with deliberate collision and knife scratches, otherwise it is easy to cause hard damage to the paint film.
7, every few years, it is best to re-paint a layer of waterborne wood lacquer to keep the wood furniture paint film new and durable.
8. If the paint film on the surface of the wood furniture is stained, immediately wash it with low-concentration soap or detergent water, then wash it with water, wipe it dry, and finally wipe it with car polish wax.
9. Finally, we must use high-quality environmentally-friendly digital color water-based wood lacquer, a good water-based wood lacquer, not only healthy and environmentally friendly, but also beautiful and beautiful furniture, while also protecting wood furniture.
More quality products, more exciting interpretations, please pay attention, digital color coatings will serve you wholeheartedly
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Carbon Steel Press fittings pipeline system is widely used in hot water supply, fire protection.
Compared with traditional pipeline system, it`s not only more economical, safer and healthier,
but also easier and faster for installation with longer service life.
1. Carbon Steel Press Fittings range:
Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;
Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;
Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;
Others-- Pipe cap, Pipe Bridge and Flange connector.
2. Material: Galvanized carbon steel, 1.0034C-Stahl,Kohlenstoffstahl, ACCIAIO AL CARBONIO.
3. Size: 3/8``-4``inch or as request, pipe wall thickness: 1.0--2.0mm
Sizes range:
DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.
JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.
4. Standard:
Press fitting standard: (DIN) DVGW W534-1995; (JIS) JWWA G116:2001; GB/T 19228.1-2003
Pipe standard: DIN10312:2003; GB/T 19228.2-2003
O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003
5. O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.
EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃, Suit medium: cold and hot water, compressed Air etc.
6. Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.
7. Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.
Installation and Connection Order
Equipments And Quality Control
Orderly Workshop
Efficient Anneal Equipment
Pressure Testing
Tensile Testing
Carbon Steel M Profile Press Fittings(DVGW)
Carbon Steel M Profile Press Fittings,Carbon Steel Press Fittings,Steel Press Elbow Extension Fitting,M Profile Carbon Tee
WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , https://www.kasinvalvefitting.com