Solution One:
For effective stone cleaning, it's best to use specialized products designed for specific types of stone. A strong, concentrated cleaner with a pH around 10.5 is ideal for breaking down organic stains and removing surface protective coatings. If needed, you can mix the cleaner with decontamination powder to prolong the reaction time and help absorb the stain into the paste. Before applying any product, always test it on a small, inconspicuous area like a corner to ensure it doesn't leave dark marks or damage the stone’s finish. Minor scratches can be easily addressed using polishing powders, but remember that a polishing machine or a single disk is required for optimal results.
Solution Two:
Another option is to use a two-component enzyme-based cleaner, which penetrates deep into the stone to break down and lift dirt to the surface. These are especially useful for plant-based stains and can be found in high-quality stone care products. If the results aren’t satisfactory, you can mix the enzyme cleaner with decontamination powder to create a thick, peanut butter-like ointment. Apply this mixture to the stained area, cover it with plastic wrap, and secure it with tape. Let it sit for 24 to 72 hours, then scrape off the dried paste with a small wooden tool. Repeat if necessary. Afterward, apply a breathable sealant to protect the stone from future staining.
Solution Three:
For stains near bathtubs or window sills, it’s likely that the marble wasn’t properly sealed or maintained. Mild detergents may not work well, so try mixing a neutral detergent with powder to make a thick paste. Apply it to the stone and rub gently with a nylon pad. The powder acts as an abrasive, helping to lift tough stains. If this doesn’t work, consider using an alkaline cleaner mixed with clay powder for a stronger solution. The same application steps apply afterward.
When it comes to scratches on the floor, it’s best to have professionals assess and re-polish the surface. Re-polishing often involves liquid or powder products, along with emery pads, so professional assistance is recommended. You can contact local stone suppliers or distributors for expert advice and high-quality restoration products.
Tiles can become loose or fall off due to poor adhesion or prolonged exposure to moisture. Using a resin-based adhesive can improve bonding strength, preventing long-term detachment. In bathrooms, where greasy, rust, and scum stains are common, a multi-purpose cleaning cream can effectively clean the porcelain without damaging its surface. For grout lines, use a brush to remove dirt and apply a waterproofing agent to prevent water seepage and mold growth.
It's important to note that many household cleaners contain acids or alkalis that can harm natural stone. These substances can alter the stone’s color and internal structure. Most cleaning agents need at least five minutes on the surface to work, during which they may already cause damage. Always use a neutral detergent when cleaning stone surfaces.
Alkaline cleaners are effective for removing grease, oil, and wax layers. Products like special strengthening oil cleaners or strong wax removers are commonly used. However, improper use of acid-alkali cleaners can lead to wasted product, surface damage, or even injury. To avoid this, follow these guidelines:
- Read the instructions carefully before use, or consult the supplier for detailed guidance. - Test the product on a small, hidden area first, and follow the correct dilution ratio. - Wear eye protection if necessary. - Avoid direct contact with skin or eyes. - Do not leave the cleaner on the surface for too long. - Rinse thoroughly with water after use. - Do not use on sensitive surfaces such as marble, glass, or metal, as some cleaners may cause irreversible damage.
Blinds Glass,Fabric Vertical Blinds,Vertical Blinds Fabric,Blind Shutter Glass
Huaian Hongrui Glass Co.,Ltd , https://www.hongruiglass.com