In the modern home decoration, the application fields of wall tiles are more and more extensive. However, due to various reasons, after the wall tiles are used for a period of time, the local tiles often vacant or even fall off, which not only affects the effect of use, but also leaves a block of unsightly “scars†on the complete wall and ground. If you encounter this situation, you may wish to use the following methods to repair:
Brand Shop: Tiles
First, if the mortar is not loose, only the tiles fall off. After the mortar on the back and around the tiles are scraped off, a little cement is added into the 107 glue to form a paste, and a thin layer is evenly coated on the back of the tile. , press the tile later to stick firmly.
2. If the mortar is dropped together with the tiles, first lightly plucking some of the pits on the original foundation surface, re-embedding with mortar mixed with 107 glue, or using cement, E-44 epoxy resin, acetone, ethylenediamine (Available at the chemical store) After mixing at a ratio of 5:3:2:1, brush a layer on the base surface with a brush and press the peeled tile up until the mortar hardens.
It should be noted that if the tiles only partially fall off, do not use force to hit the mortar on the foundation surface to prevent vibrations and loosen the original solid tiles.
Links: Qi Family Classroom: Misunderstanding of Tiles Selection
Tile Tiles Cement Home Decor Tiles Decor Home Decor Tiles
Basic Dyes,Malachite Green,Paper Dyestuffs
Tianjin Zhaobo Chemical Co., Ltd. , http://www.tjaciddyes.com