It is made of anti-static glue and latex mixture. It does not contain silicone oil, ammonia, surface resistance: <10 10th power, effectively preventing static electricity.
Suitable for handling electrostatic sensitive parts, strictly controlling static electricity to produce low dust, suitable for clean room use.
Special cleaning treatments reduce the content of ions, residues, dust and other contaminants. Average surface resistivity: Initial voltage: 10KVX 30 seconds, final voltage: 0V. Speed: ≦ 1.25 seconds.
Tested at 26 and 45% relative humidity, storage conditions: low temperature, dry, protected from light.
Anti-static finger sets Technical Information
Resistivity: 10 8th power - 10th power 10th; color: black, beige and pink (more commonly used beige); 1440 / bag: to avoid skin irritation, to prevent the fingertips of sweat contaminated components, fingertips The ultra-thin is beneficial to the flexible operation of the fingers, and the internal proper tightening design avoids finger fatigue and is economical. And it can safely discharge the human body's electrostatic charge.
Applicable to semiconductor industry, electronics factory, optoelectronics industry, medicine, laboratories and other fields when working wear.
use:
1. Pick colored vegetables such as seaweed, wormwood, and Nepeta, and wear them to prevent the hands from being stained by the vegetable juice; wear shelled food such as peanuts and soybeans to prevent the hands from being worn and worn.
2. Wear fingers and toes to wear after bathing to prevent water from entering the wound and causing infection.
Anti-static finger sets
3. For anal plug medicine.
4. Point the banknotes and put them on the fingers when distributing the newspapers. The hands are not slippery, and the numbers are good, and the hands are not dirty.
5. Take discs, beads, etc., leaving no fingerprints and sweat stains.
6. Wear it on your hands when doing it manually to prevent it from being worn out.
7. When the bag is sealed in a plastic bag, the bag opening is not easy to open. Put on the finger cuff, it is easy to solve.
8. When writing on the blackboard with chalk, wear finger-tips on the thumb, forefinger, and middle finger to prevent chalk from rubbing hands. This is very suitable for teachers.
Warm tips:
1. When used for waterproofing, please check whether there is any air leakage, breathe into the sleeve, and then pinch the mouth tightly to see if the sleeve is small or not. If it is not small, it means no air leakage. It can be used.
2. Can not wear for a long time, if you feel the fingertips swollen, numb, purple hair should be immediately removed, and raise your fingers, will slowly recover as before.
3. Dry after use, can be used repeatedly.
4. When you use it badly for many times, you can put some powder or talcum powder for lubrication.
5. Avoid sharp objects, such as needles, scissors, toothpicks and so on.
6. Take it from the top down to take it, so that it is not easy to break, easy to wear next time.
China Labor Insurance Network
Stamping Parts,Metal Stamping Part,Local Steel Metal Stamping,Plate Parts
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrade.com