You don’t know the “unspoken rules” of solid wood furniture, so the furniture is more durable

Solid wood furniture is of high grade and expensive, so the maintenance frequency is relatively high, and the cost is not low. How can we make solid wood furniture more durable?

Do expansion joints have to be kept?

I believe that people who have some research on solid wood homes must know the tenon-mortise structure better. It does not need an iron nail, but it can skillfully combine furniture. Expansion joint is to prevent the frame or corner of the furniture from cracking when the wood shrinks or expands due to the influence of the external environment, resulting in the loosening of various furniture components, which cannot be used normally.

How to distinguish "real wood"

The climate and temperature in different regions of my country are different, especially in places with humid climates, solid wood furniture is more susceptible to moisture deformation. Therefore, before the wood is made into furniture, there is generally a drying process. But even so, it is necessary to reserve expansion joints.

The longitudinal shrinkage of the wood is not large, generally no expansion joints are required at both ends. However, there are special cases. Some manufacturers do not keep expansion joints, but not leaving them does not mean not, because manufacturers may prevent the wood from deforming by controlling the dryness of the wood.

How suitable is the expansion joint?

Since most solid wood furniture will retain expansion joints, how much is more important. The width of the expansion joint is generally within 0.3-0.5 cm. If it is too wide, it will be ugly. The width of the expansion joint also needs to be determined according to the actual size of the furniture.

Anisotropic Ferrite Magnet

Magnet For Speaker,Anisotropic Ferrite Magnet,Anisotropic Block Ferrite Magnet,Anisotropic Circular Ferrite Magnet

Honesun Industrial Co.,Limited , https://www.chinamagnetise.com