Sports equipment standards can not be ignored in school security

In the form of continuous mention of people’s living standards in recent years, attention has gradually been paid to their own health. As a result, the placement of related sports equipment can be seen everywhere in our daily lives. In normal times, it is not only necessary to master the correct operation methods, but also Further understanding of the materials used in its production, from which Xiaobian introduced us to the standard production standards and quality standards for sports equipment:

Sports equipment production standards:

1. The surface of sports equipment is treated with double-layer households, electrostatic spraying, high-temperature paint, anti-ultraviolet radiation, and not easy to fall off.

2. The production of the equipment is based on the crowd, with ergonomics and sports medicine as the scientific basis, and material selection based on material mechanics and structural mechanics.

3, the use of national standard pipe, the surface after derusting, degreasing sulfuric acid, cleaning, phosphating, polishing, the surface by double advanced spray treatment, electrostatic spray, high temperature up to 200 degrees plastic powder.
4, floor mats: for sports equipment mats imported rubber, made by special technology. Non-slip, safe, environmentally friendly, non-toxic, loss-proof, weather resistant, water washable, etc.

5, screws: security anti-theft screws, and equipped with a special plastic cover. With security, anti-theft and other characteristics.

Next, Xiao Bian will give you a brief introduction to the quality standards of some common sports equipment such as horizontal bars, basketball frames, and table tennis tables.

Buried horizontal bar

First of all, in terms of material selection, the column of the horizontal bar requires high-quality steel pipes with a diameter of at least 60mm, and the bar must be made of solid spring steel, and the diameter should be at least 28mm. As for the height of horizontal bars, the standard for low horizontal bar is 1.5m (secondary school) and 1.4m (primary school), while the standard for high horizontal bars is 1.8m (secondary school) and 1.6m (primary school). In color, the column of the horizontal bar should use blue, and the horizontal bar should use yellow. Lastly, the surface of the equipment should be well-processed so that the horizontal bar has good resistance to oxidation and abrasion.

2. Basketball ball box

Basketball is one of the most popular ball games among boys and it is a mainstream sport among students. In the primary and secondary schools, the height of the pillars of the basketball stand is 1.6m and 1.4m respectively, and the arm of the ball stand should be a high-quality steel plate with a thickness of 4mm and a diameter of 16.5cm. Most of the basketball ball racks are of buried design. The size requirements for the buried ground are at least 80*80*80cm, and the anticorrosion treatment of buried parts should be particularly fine. In the same way, the surface of the basketball hoop should also be treated for anti-corrosion, anti-ultraviolet, and rain-proof sunscreen to extend the life of the basketball stand as much as possible.

3. Table tennis table

The table shall be made of a steel tube with a thickness of 4 mm and a diameter of 6 cm, and a rainbow structure shall be adopted on the bottom frame to ensure the stability of the entire table. The table of the ping pong table shall be made of DMC material, and the production shall be adapted to the one-shot forming technique, and at the same time, the “well” shape design shall be used to reinforce the table top. The color of the countertop is usually a new blue or navy blue with good gloss. In addition, the platen should also be able to maintain its long-term long-term stability so that it does not crack or foam. As for the size of the ping-pong table, it is generally 2340*1300*640mm in primary schools, and the standard to be met in secondary schools is 2740*1525*680mm.

The above are the standards for several common sports equipment. We must remind everyone that when purchasing these sports equipment, we must select products that meet the above standards, so as to fully ensure the safety of users and make the durability of the equipment. At the same time is guaranteed.

Pool tables

Corn Husk is a by-product of corn deep processing enterprises. The corn granules are immersed and then enter the starch production process, and then processed by washing, squeezing, drying and the like. Its main components are fiber, starch, protein and the like. The Corn Skin separated by soaking and crushing corn.

Corn Skin has the protein 10%-12% ,12%-14% protein.

Corn Husk Corn Fiber 10%-12%

Corn Husk Corn Fiber 10%-12%,Corn Bran,Corn Fiber,Corn Skin,Corn Husk

MIDI FEED BIOTECH LIMITED , https://www.midifeed.com