The effect of tile use is good, in fact, mainly depends on its own quality, good quality tiles can generally be used for a long time, but many consumers in the purchase of tiles, will fall into many misunderstandings, and these will be related to the tiles For future use, it reminds everyone to pay attention. Tile brand miscellaneous on the market, multi-professional name and puzzling, to a short time to do "know the roots of the tile" is not an easy task, where the analysis of the errors in the purchase of tiles, to beware of the purchase in advance be fooled.
Misunderstanding 1:
The bigger the tiles, the better. Many domestic consumers think that the bigger the tiles, the more fashionable and upscale and the more powerful and stylish. In fact, in addition to the high price, tiles with large specifications also bring inconvenience to handling, design and cutting. In Europe where the modern ceramic industry is very developed, almost all of them are small-sized products, and the demand for bricks exceeding 600 mm is very small.
Misunderstanding 2:
The whiter the tiles, the better. White blanks have high requirements on raw materials. The production of white bricks in many production areas in China is very scarce. Some manufacturers have even added radioactive zirconium raw materials in order to increase the whiteness of glazes. It is understood that, in fact, China's red billet raw material reserves are very rich, but in the more white and more high-grade brick consumption trend of the trend under the guidance of manufacturers, manufacturers have to abandon red and white.
Misunderstanding three:
The thicker the tiles, the better. Most consumers think that the thicker the tile is, the stronger it is, and it looks more like stone. In fact, the strength of a tile lies in its crack resistance, not its thickness. At present, the development direction of international architectural ceramic products is light, thin, strong, durable, and personalized.
Misunderstanding 4:
Polished tiles are not slippery. Polished bricks have a high degree of smoothness and good flatness on the brick surface. They can be in full contact with the soles, which increases the friction between the brick surface and the sole, and can achieve a non-slip effect. Some brands of polished tiles are still non-slip in the presence of water on the surface.
Myth 5:
Matte bricks are not easy to clean. In general, matt glazed tiles are relatively easy to absorb dirt, but do not seep into the glaze and can be removed with common cleaners. In fact, most of the glazed layers on the surface of the matt bricks have been specially treated to be wear-resistant, non-slip, non-absorbent, and easy to clean.
Misunderstanding 6:
Paving tiles leave no seams. In order to pursue aesthetics, some consumers like to use thin seams or even no seams when laying tiles. After such paving, due to thermal expansion and contraction, wet, dry and other factors, tiles may be arched or even cracked, destroying the decoration effect. ExpressNet believes that it is necessary to leave seams in the interior decoration. Generally, the brick seams on the wall need 2mm, and the brick seam on the ground needs 3-5mm.
Misunderstanding 7:
White cement caulking. In the past, when people were performing interior renovations, white cement was used for the gap between the tiles on the ground and walls. However, cracking, discoloration, peeling, and back-alkali may occur after being caulked with white cement. Therefore, professional caulking agents should be used to make joints.
Tile Tiles Buy Entrance Decoration Cement Interior Decorating Design Premium Tiles Tiles Price Tiles Specifications ld Tiles
Raw Material Of Paper-Made,Paper Dish Raw Material,Paper Cup Raw Material,Raw Material For Paper
NINGXIA PURU CHEMICAL CO., LTD , https://www.nxpuruchem.com