Yuba is more common in the home appliances, integrated ceiling type bathroom heater installation has its complex processes and what to pay attention to, we need to pay attention to what the installation process, today Xiao Bian will introduce you to the installation of integrated ceiling Yuba matter.
1, power wiring to regulate
The power of Yuba can be up to more than 1100W. Therefore, the power wiring for installing the Yuba must be a waterproof cable, preferably a multi-filament copper core wire of no less than 1mm. All the power wiring must go through the plastic pipe in the wall. No open-wire settings are allowed. The Yuba power switch must be a qualified product with a waterproof capacity of over 10A, especially the old house.
2, the thickness of Yuba should not be too large, in the installation problem, consumers must pay attention to the purchase of bath thickness can not be too large, generally about 20 cm can be. Because the bathroom heater is installed on the roof, if you want to install the bath heater must be added to the top of the roof, which is what we often say PVC ceiling, so that the latter part of the Yuba can be sandwiched in the middle of the two, if Yuba is too thick, so the decoration can be troublesome
3, should be installed in the center of the bathroom Many families will choose the top of the shower or bath position, so that the surface looks easy to actually have a lot of security risks. Because the infrared radiation lamp warms up quickly, it can burn the body too close. The correct installation method should be in the center of the bathroom top or slightly close to the bathtub, so that it is safe and can maximize the function.
4, do not spray with water when working
Pay special attention when using, although the current bathroom heaters are waterproof, but the actual use of water can not be splashed, although the waterproof bulb Yuba waterproof performance, but the body's metal parts can not do this, if If water is splashed, it may cause a short circuit in the power supply.
5, keep the bathroom clean and dry
After the bath is completed, do not turn off the bath immediately, wait until the moisture in the bathroom is drained off after the shutdown, usually also to maintain ventilation, clean and dry, extend the life of Yuba.
Summary: The above is how to install the integrated ceiling Yuba related matters, because he needs to design a lot of matters in the installation process, so the installation of integrated ceiling type Yuba should pay more attention to the place, I hope to give you some in the installation process Suggest.
Ceiling Yuba ceiling design bathroom interior decoration switch home decoration appliances bathroom design bathroom waterproof bathroom ceiling
As our first production line for Thermostat Ceramics in our factory, we have got sufficient experience and knowledge how to control the quality and cost in the past 11 years.
We can offer varity of oven Bimetal Thermostat Ceramics, iron thermostat ceramics, and thermostat switch ceramics with standard or customized type.
Bimetal Thermostat Ceramics
Bimetal Thermostat Ceramics,Bimetal Thermostat Zjt-1B Ceramic,Hot Press Bimetal Thermostat Ceramics,Good Hardness Ceramics For Bimetal Thermostat
Jinghui Industry Ltd. , https://www.ceramictek.com