Advantages and purchase knowledge of solid wood crib

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

It is best for infants and toddlers to have a crib to ensure the safety of the baby. The crib is made of a wooden bed, because the human spine has three physiological curvatures, namely neck curvature, chest curvature and waist curvature. These curvatures are also gradually formed while the various organs of the infant's body are rapidly developing or growing. Infants and young children contain more organic matter in the bones, and the inorganic salts such as calcium and phosphorus are relatively less. Therefore, they have the characteristics of large elasticity, softness and not easy to fracture. The sleeping board can make the spine in a normal bending state and will not affect the baby. Normal development of the spine.

Nowadays, many families in the city have replaced the wooden bed with a spring-loaded bed. In fact, this is not good for the baby because the bones of the infant's spine are soft, and the surrounding muscles and ligaments are also very soft. Because of the large weight of the buttocks, it may be flat when lying down. Causes chest curvature, waist curvature reduction, side lying can lead to scoliosis, the baby is in an uncomfortable bending state whether it is lying or lying on the side; a bed with poor elasticity will make it difficult to turn over, resulting in a certain part of the body. Compression, over time, will form a hunchback, funnel chest and other deformities, not only affect the body shape of children, but more importantly, hinder the normal development of internal organs, the harm to children is extremely great. For the baby's health, the baby should not be allowed to sleep on the spring bed.

Purchase details

Guardrail

The guardrail is the biggest feature of the crib. The adjustable height guardrail is ideal. It can adjust the height according to the height of the baby. It is safer and can extend the service life. The column of the guardrail is preferably cylindrical, and it has no edges and corners. The spacing should not exceed 7cm to prevent the baby's head or body from protruding from the middle to cause danger.

Love Tip: Some beds have adjustable bed bottoms, which are suitable for the height of the baby by adjusting the height of the bed. This feature is similar to an adjustable guardrail.

height

For the toddlers, in order to let them learn to go to bed, there is no danger of falling, it is best to choose a bed with a lower height. If there is enough space in the home, you can put a carpet or cushion around the crib to protect it.

Bed board

The bed board should be firm and strong, and the adjustable bed board design is ideal. It can be adjusted at any time according to the height of the baby.

mattress

Comfort is the primary consideration. A soft or hard mattress is not conducive to the growth of the baby's bones. It is necessary to choose the appropriate hardness according to the weight of the baby. It is best to use a high-quality mattress with a strong hand and good support; in addition, there is a mattress between the mattress and the bed frame. Pay special attention if there is no gap. If it is, it means the mattress is too small, it should be replaced, or use a thin blanket or towel to fill the gap to prevent the baby from sticking the finger inside. When the mattress is adjusted to its highest position, it is at least 40 cm from the edge of the bed. The second is to be able to protect the baby's spine well, because the newborn baby is lying flat on his back, the back and the back of the head are on the same plane, and the neck and back muscles are naturally relaxed. The baby's head is large, almost the same width as the shoulder. When the side is lying, the head and the body are in the same plane. It is also necessary to prevent the baby from having a head and spitting milk.

Positioning card lock (active sidebar Drop side)

The bed edges on either side of the crib usually have two height adjustment positions, and these adjustment controls must have a child-resistant fixed lock. Some cribs are designed with one-sided adjustment control to reduce the chance of accidental release.

Pattern, carving

Some parents like cribs with more complicated patterns and more carvings. In fact, such a bed has some unsafe factors. For example, the raised carvings on the bed rails or the bed are easy to hook up the baby's clothes. When the baby tries to break free, there may be a bump in the head or limbs. It is best not to attach a sticker to the crib. If the sticker is lifted, the baby is likely to tear it off and stuff it into the mouth. Some cribs are painted in a variety of colors, so pay special attention to whether the paint is environmentally friendly, lead-free and non-toxic.

size

Cribs are generally used for about 1-2 years. Too small, short life; too large, the baby is not safe to use. The size of the crib can be adjusted to suit the size change. However, such beds should pay particular attention to their firmness and adjustability to avoid danger during use.

Roller and rocking function

A small wheeled crib can be pushed and pushed freely for easy placement. However, such a bed must pay attention to whether there is a safety brake on the wheel and whether the brake device is firm. Some cribs also have a swing function and have a cradle. This type of bed must also pay attention to whether the connection between its parts is tight and firm. Usually four wheels, two of which must have a brake.  

Manual Mounting Machine

The vacuum system provides excellent pore impregnation in a compact form. As a result, edge retention is improved and refined samples are supported during grinding and polishing. Compression installation is the preferred method for achieving the best edge retention and highest throughput. Provides compression mounting systems and mounting compounds designed to meet the different needs of different laboratories

Manual Mounting Machine,Hardness Inspection Metallographic,Mounting Press Equipment,Cold Mounting Sample Preparation

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com