The use of PTFE :
Various enamel linings, glass linings, plastic linings, rubber linings, graphite linings and stainless steel, titanium steel towers, heat exchangers, reaction vessels and other flange surface sealing.
Flange sealing of various pipes and fittings.
The surface machining accuracy is poor, the uneven area is large, and the shape is irregular. The bolt tightening force is not easy to seal with the flange surface of the large-diameter equipment that is not enough or not too large.
Strongly corrosive media and seals that cannot be minimally contaminated.
The use of PTFE tape sealing tape with a pressure-sensitive adhesive transfer tape on one side, from the use of a fixed position, in order to let go of the operation, easy to install, and after the small cross-section of the sealing tape for sticking to the larger sealing surface to provide convenience.
Very versatile. As long as this product is available, it can replace numerous specifications of the type of shimming gasket, because as long as there are few specifications of EPTFE sealing tape, it can meet a wide range of needs, even the smallest specifications, can also be used for large-scale large-scale sealing surface. Ordering and depositing are extremely convenient. And because it will not age, the storage time is unlimited and can be used forever.
The use of EPTFE sealing tape is extremely easy to remove during inspection and maintenance. The sealing surface can be easily glued without the need for cleaning and scratching (as is the case for packing seals). Long service life, greatly reduced number of maintenance, and can be reused, the use of cost is only one-fifth of metal spiral wound gasket.
Various enamel linings, glass linings, plastic linings, rubber linings, graphite linings and stainless steel, titanium steel towers, heat exchangers, reaction vessels and other flange surface sealing.
Flange sealing of various pipes and fittings.
The surface machining accuracy is poor, the uneven area is large, and the shape is irregular. The bolt tightening force is not easy to seal with the flange surface of the large-diameter equipment that is not enough or not too large.
Strongly corrosive media and seals that cannot be minimally contaminated.
The use of PTFE tape sealing tape with a pressure-sensitive adhesive transfer tape on one side, from the use of a fixed position, in order to let go of the operation, easy to install, and after the small cross-section of the sealing tape for sticking to the larger sealing surface to provide convenience.
Very versatile. As long as this product is available, it can replace numerous specifications of the type of shimming gasket, because as long as there are few specifications of EPTFE sealing tape, it can meet a wide range of needs, even the smallest specifications, can also be used for large-scale large-scale sealing surface. Ordering and depositing are extremely convenient. And because it will not age, the storage time is unlimited and can be used forever.
The use of EPTFE sealing tape is extremely easy to remove during inspection and maintenance. The sealing surface can be easily glued without the need for cleaning and scratching (as is the case for packing seals). Long service life, greatly reduced number of maintenance, and can be reused, the use of cost is only one-fifth of metal spiral wound gasket.
| For products reference | ||
| No. | Item | Description |
| 1 | Bearing Bar Size | 25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10---100x10mm etc. |
| I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etcUS standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc. | ||
| 2 | Bearing Bar Pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 31, 32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc. |
| US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc. | ||
| 3 | Cross Bar Size and Pitch | Twisted bars 5x5, 6x6, 8x8mm; Round bars Dia.6, 7, 8, 9, 10, 12mm and so on. |
| 38.1, 40, 50, 60, 76, 80, 100, 101.6, 120, 135mm, 2'' & 4'' etc. | ||
| 4 | Material Grade | ASTM A36, A1011, A569, Q235, S275JR, SS400, Mild steel & Low carbon steel, etc. |
| Stainless steel SS304, SS316.s335jr | ||
| 5 | Surface Treatment | Black, self colour, hot dip galvanized, painted, powder coating, electrolytic polishing. |
| 6 | Grating Style | Plain / Smooth, Serrated /teeth, I bar, serrated I bar. |
| 7 | Standard | China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88),UK: BS4592-1987, Australia: AS1657-1985,Germany: DIN24537-1-2006, Japan: JIS. |
| 8 | Panel Size: | 3x20ft,3x24ft,3x30ft,5800x1000, 6000x1000, 6096x1000,6400x1000, as request |
| 9 | Application: | oil refinery,petroleum and chemical Industry, Seaport and airport, power plant, transportation, papermaking, medicine, steel and iron, food, municipality, real estate, manufacturing,metallurgy,railway,boiler,etc |
Steel Grating,Steel Bar Grating,Galvanized Steel Bar Grating,Steel Bar Grating For Bridge
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayigrating.com