2. When the monitor button is pressed, the indicator lights up in green to indicate that the transceiver is in the forced receiving state. This function is used when the transceiver receives a weak signal, which is not commonly used. This function is very power consuming and is not recommended.
3. The same factory model of the walkie-talkie factory frequency is the same, you can talk, different models of walkie-talkie as long as the same frequency band can also be programmed software to achieve the change frequency to get the call.
4. The search channel function does not have this feature for every radio. Generally, there is no standard 16 on the channel 16 position. Instead, it is marked with an S letter. This is a feature of the channel scan, but it requires programming software to set it. In case of use, generally not set, as with other channel functions, the channel is a temporary fixed frequency. After it is turned on, you can search for the channel you are talking from between 1-15 frequencies.
5. The use of walkie-talkie is very simple. Make sure the interphone is on the same channel, hold down the launch key and speak 2-5 centimeters away from the mouth, then release it after speaking. No buttons are needed to receive.
Precautions
1. While the intercom is firing, keep the intercom in a vertical position and keep the microphone 2.5-5 cm away from the mouth. When transmitting, the intercom is at least 2.5 cm from the head or body. If the handheld radio is carried on the body, the antenna is at least 2.5 centimeters from the human body when it is launched.
2. Do not perform multiple power-on and power-off actions during use, and adjust the volume to the level that suits your hearing.
3. Do not twist the antenna during use. Do not bend the antenna. Do not use the broken antenna firmly. This will affect the quality of the intercom call. In severe cases, the instant voltage of the intercom will burn the power amplifier of the machine.
4. In dry and rainy weather, the machine should be kept as dry as possible. The machine should not be placed under the air-conditioner and it is easy to infiltrate the circuit boards. Rainy days should be covered with a waterproof cover film when used outdoors. For some walkie-talkies that have a waterproof effect, they should be kept as far as possible.
5. If the transceiver shell is mixed with dirt or grease. Can not be put into the water for cleaning. Neutral detergent flannel should be used to wipe. Some walkie-talkies with a waterproof effect can be flushed but the water pressure should not be too high.
6. For machines that have already entered the water. You should immediately deduct the battery from the initial water and do not attempt to perform any voice operation. Then dry it with a cloth and send it to the service station as soon as possible.
Wuxi Holly`s shooting clay target is an exciting enhancement to clay pigeon shooting.On impact from a high velocity projectile, such as a pellet from a shotgun, the target ignites in order to reflect a direct hit producing a pyrotechnic reaction.The reaction is effective and exciting, resulting in an explosion of white smoke, bright flash and a fairly loud bang.
Our shooting target is produced by new green clay materials, it is green environmental protection, no pollution and could be easily degraded. It could be used in professional shooting competitions.This type is smoking clay target.They're made from a mixture of pitch and pulverized limestone to achieve that calculus of durability and brittleness to break when hit by a few shotshell pellets.There are biodegradable targets that over time dissolve into the soil.
Clay Shooting Target,Colorful Shooting Targets,Safety Clay Pigeon Target,Safety Clay Target
Wuxi Holly International Trading Co., Ltd , https://www.hollynbr.com