In the reaming of the turret type turret lathe, the reamer does not rotate only the axial movement of the workpiece and the workpiece rotates. Contrary to the reaming of the drilling machine, the reaming of the workpiece brings more difficulties. The main reason is that the axis of the reamer does not coincide with the axis of the spindle of the turret lathe. The non-coincidence conditions are as follows: (1) The axis of the reamer is parallel to the axis of the lathe spindle but has a slight decrease H. As shown in Figure 1. (2) The axis of the shank of the reamer coincides with the axis of the spindle of the lathe
Door System,Pocket Door System,Sliding Door System,Sliding Door Security
MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com