Holes perpendicular to the axis of the shaft are drilled on the cylindrical part. Sometimes the center line of the hole has a symmetry requirement with the axis line of the part, and the method of drilling with a proof eye can not meet the requirements. To this end, we have designed the fixture as shown in the figure. The method of use is as follows: First, clamp the centering cone 2 on the drill chuck 1? Correct the concentricity of the centering cone 2 and the spindle of the drill with a dial indicator. (Control at 0.02mm), then place the V-shaped block 3 on the drilling table, so that the tapered surface of the centering cone 2 is in good contact with the V-shaped surface of the V-shaped block, and then
PCD Cutting Tips (Cut Pieces)
PCD cutter pieces (grains) are cut from Pcd Cutting Tool Blanks and are a more efficient and economical cutting service for customers than the wire cutting method, laser cutting.
And the cut grains are welded to saw blades, knives and other tools used for processing wood and metal.
Bohong New Materials can provide different shapes of Pcd Cutting Chips according to customers' requirements, and we are also happy to provide customers with product application consulting services.
Pcd Cutting Tips Cut Pieces,Using A Metalworking Lathe,Pcd Die Black For Wire Drawing,Pcd Cutting Tools Pcd Cut Tools
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com