Use and maintenance of stone engraving machine

(1) Working environment

The stone engraving machine is a high-tech mechatronics equipment with certain requirements for the working environment.

1. Avoid equipment such as strong electricity and strong magnets that seriously affect the signal transmission of the engraving machine. Such as: welding machine, tower, etc.

2. Use a three-core power supply to ensure good grounding of the engraving machine and reduce interference.

3. The voltage requirements are stable and avoid large fluctuations. It is best to use a voltage regulator.

4. The machine should not work for a long time in a strong acid or alkali environment.

(2) Maintenance and maintenance

In the use of stone engraving machine, care should be taken to keep the screws, racks, guides and other components clean and lubricated, clean the dust and fuel the transmission parts in time; the operators should clean and refuel in time, and it is forbidden to plug in and out.

(3) Software use

The engraving machine has a wide range of engraving software available. Such as: Wentai carving, carving, Caxa, Mastercam, Artcam, Type3, etc., in order to meet your engraving requirements, please use the correct operating software.

(4) Processing problems

1. Rationality of processing technology

The machining accuracy is also important in addition to the engraving machine. In order to ensure the accuracy of the processing, please pay attention to the rationality of the processing technology.

2. Tool use

The machining accuracy is affected by the manufacturing process and accuracy of the tool itself. Therefore, select the tool that is suitable for machining during machining.

3. Operator

The proficiency and responsibility of the operators also have a great impact on the machining accuracy. The customer's operators must have a proficient computer operation basis. In the training process, they should be proficient in selecting different engraving speeds for different materials and using different tools. This often requires accumulation of experience, mastery, and extension of the machine. And the life of the tool is great.

Global hardware network

Concerned about surprises

Label: use and maintenance of stone engraving machine

Previous: Difference analysis between single control switch and dual control switch Next: Design and maintenance technical points of multistage centrifugal pump

In the penetrating type, the stunner uses a pointed bolt which is propelled by pressurized air or a blank cartridge. The bolt penetrates the skull of the animal, enters the cranium, and catastrophically damages the cerebrum and part of the cerebellum. Due to concussion, destruction of vital centres of brain and an increase in intracranial pressure, the animal loses consciousness. This method is currently the most effective type of stunning, since it physically destroys brain matter (increasing the probability of a successful stun), while also leaving the brain stem intact (thus ensuring the heart continues to beat during the bleed. This however has no bearing on the efficacy or speed of the bleed, as cardiac output requires a venous return, as venous supply is severed, this does not occur. The bleed hence relies on gravity and not a heartbeat). One disadvantage of this method is that brain matter is allowed to enter the blood stream, possibly contaminating other tissue with bovine spongiform encephalopathy (BSE, colloquially known as mad cow disease).

Captive Bolt Stunner

Captive Bolt Stunner,Captive Bolt Stunner Kit

Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com