Isca introduces easy-to-operate turning with a side locking mechanism

After the introduction of the revolutionary cutting-grooving tool GEHSR/L-SL with side locking mechanism, Iskar has applied the new side locking mechanism to the holder GHSR/L of the CUT-GRIP. The GHSR/L-SL cutters are available in 10, 12 and 16mm knives and hold CUT-GRIP inserts such as GIP, GIG, and GIP. In addition, the new tool has a high-pressure cooling through-hole with coolant directly to the cutting edge for a maximum cooling pressure of 340 bar.

Features are as follows: small-size cutter turning-cutting cutter with high-pressure cooling, which can be clamped on Swiss automatic lathes and small automatic lathes; fast and simple loading and unloading on Swiss automatic lathes; blades derived from side locking mechanisms The clamping method enables the machine to be replaced on the lathe lathe; the blade can be loaded and unloaded from both sides of the cutter body.

The Swiss automatic lathe turret design makes it difficult to replace the blade with a standard screw-clamping arbor, which is sometimes impossible. The Isa side locking mechanism makes it easy to handle the blade from both sides of the shank by means of a wrench, and the blade can be loaded and unloaded in the machine. After deciding to clamp the blade from one side, the screw hole on the other side can be blocked with a sealing plastic screw to prevent chip entry. When changing the direction, move the plastic sealing screw to the other side screw hole.

The body has three independent coolant inlets for machine tools of different constructions. The shank with side locking mechanism also incorporates high-pressure cooling, making the new range very attractive for Swiss automatic lathes (SWISS), small automated lathes and small lathes.

Pa6 Gf30 Sheet is based on PA6, adding 30% glass fiber to enhance its heat resistance, strength, stiffness, creep resistance, dimensional stability, wear resistance, etc., it's maximum allowable temperature is higher.PA6 GF30 SHEET is widely used in wear parts, transmission structural parts, anti-corrosion equipment gears and component,etc.

Product

Thickness(mm)

Size(mm)

Color

Density(g/cm³)

PA6 GF30 SHEET

8-100

610*1220

black

1.3

PA6 GF30 SHEET

Pa6 Gf30 Sheet,Pa6 Gf30 Datasheet,Color Pa6 Gf30 Sheet,Nylon Pa6 Gf30 Sheet

Shenzhen Anheda Plastic Products Co.,Ltd , https://www.ahdplastic.com