Xinfeng engineers of Jilin Ruibo Building Technology Co., Ltd. reminded the owners that the fresh air system can save most of the energy, make the indoor oxygen content higher, the air is fresher, but because it needs 24-hour ventilation, the air conditioner is better to choose the power. A little, so as not to affect the effect. When the owner buys a house, he should ask if there is any damage to the load-bearing wall during the installation of the fresh air system. In a certain district of Changsha, the real estate development company in order to install the fresh air system for the owner, in the case of the owner without any knowledge, A number of holes of a dozen centimeters were cut into the main beam and were collectively protested by the owners of the community.
When accepting the fresh air system, it is necessary to check whether the quality of the main engine of the fresh air system is passed. It is required that the developer must deliver the house according to the brand and quality of the fresh air system between the models, because the quality of different motors and blades varies greatly, and the service life is also very different. . The new wind engineer of Jilin Ruibao Building Technology Co., Ltd. reminded the owners: “If you don’t understand the brand, you can use your ears to listen. The good quality of the fresh air system is not very loud. Most of the fans are installed above the kitchen or the bathroom, so the impact on the rest area. Not big.†At the time of acceptance, you should also check whether the installation position of the motor is easy to overhaul, and whether the filter is easy to remove and wash. The new wind engineer of Jilin Ruibo Building Technology Co., Ltd. reminds the owners: “The position of the motor and the position of the filter are very important. The motor should be installed in an easy-to-access position. Because the filter should prevent dust and mosquitoes, it should be cleaned once a month to avoid affecting the air intake.†During the acceptance, carefully check whether the fresh air pipe is evenly distributed and whether the ventilation pipe is broken. . The Xinfeng Engineer of Jilin Ruibao Building Technology Co., Ltd. reminded the owners: “The method is very simple. Open the fresh air system in each room and check if there is any wind. If there is no wind, the pipeline may be unevenly distributed. There is no wind, it may be that the pipe is broken or sunken."
Through the above points, the owner can accurately identify some problems that are easy to exist in the fresh air system when accepting the fresh air system, and reduce the problems in the use of the fresh air system.
Fresh air consultation:
support hotline
Decoration QQ group
Fresh air QQ group
Others Series Products
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto parts,
Aluminium Die Casting for Communications, lamp part series, water pump
part series, power tool series, radiator part series, anti-static
flooring products and Other Series Products.
3.Die casting consulting for aluminum die casting part design and Die Casting Tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
Other Series Products
Alloy Die Casting Series Products,Aluminium Die Casting,Die Casting Series Products
Ningbo Bowang Machinery Co.,Ltd , http://en.zjbwjx.com