1. The hardened gear reducer must be installed on a rigid, flat base. The paint and grease on the mounting surface must be cleaned before installation.
2. The minimum performance level of the connecting bolt is 8.8.
3. The coaxiality error between the axis of the input and output shafts and the working machine and the motor shaft line shall not exceed the allowable value of the coupling; if the belt drive input power is used, the tension of the belt shall comply with the regulations to avoid Causes additional radial forces.
4. Couplings, pinions, etc. are not allowed to be fitted to the end of the shaft by means of a hammer.
This installation method is also applicable to gear reducers.
This article is from: http://
Steel Structure Building formed by Steel Column , Steel Beam ,Bracing ,Purlin , all the Steel Structures Fabricated in Workshop and delivery to Project site , quickly installation , green building and save manpower.
Application: The steel workshop warehouse building is widely used for workshop plant, warehouse, office building, steel shed, aircraft hangar ,car shop, chicken house, cow house, etc.
Steel Structure Industrial Building
Steel Structure Industrial Building,Steel Frame Building,Industrial Steel Buildings,Prefabricated Steel Structure Industrial Building
Zhongda Steel Structure , http://www.zhongdametal.com