Cycloidal pinwheel reducer features:
1. High-speed ratio and high-efficiency single-stage transmission can achieve a reduction ratio of 1:87, and the efficiency is above 90%. If multi-stage transmission is adopted, the reduction ratio is larger. The first gear transmission reduction ratio of the cycloidal pinwheel reducer is 9~87, the double-stage transmission reduction ratio is 121~5133, the multi-stage combination can reach tens of thousands, and the pin gear meshes with the rolling friction, and the meshing surface has no relative sliding. Therefore, the first-stage deceleration efficiency is 94%.
2, smooth operation, low noise, cycloidal gear teeth, large number of teeth, large overlap coefficient and mechanism of machine balance, so that vibration and squeaking are limited to a minimum. In the operation, the number of pairs of teeth that are in contact at the same time is large, the degree of coincidence is large, the operation is stable, the overload capability is strong, the vibration and the noise are low, and the noise of various specifications of the model is small.
3. Compact structure and small size Due to the planetary transmission principle, the input shaft output shaft is on the same axis, making the model as small as possible.
4. Reliable use and long service life Because the main parts are made of bearing steel materials, high strength is obtained by quenching treatment (HRC58～62), and some transmission contacts adopt rolling friction, so the durability is long. Because the main parts are made of bearing steel quenching treatment (HRC58-62), and then refined, and the cycloidal teeth and the toothed sleeves are meshed and transmitted to the teeth to form a rolling friction, the friction coefficient is small, so that the meshing area has no relative sliding. Extremely wear-resistant, so durable.
5, reasonable design, easy maintenance, easy to disassemble and install, the minimum number of parts and simple lubrication, so that the cycloidal pinwheel reducer is deeply trusted by users.
Compared with other reducers of the same power, the weight is smaller than 1/3. Because it is a planetary transmission, the input shaft and the output shaft are on the same axis to obtain the smallest possible size.
material
Galvanized Iron Wire or Black Iron Wire or PVC wirespecification
Name
Galvanized straight cut wire& black annealed straight cut wire
T/S
30g-300g/mm2
characteristic
soft,long using
material
low carbon/mild iron wire Q 195
diameter
8#-25#(4.04mm-0.58mm)
classification
coil wire,cut wire,u-type wire.( Straight Cutting Wire , Iron Straight Cut Wire )
usage
used in construction or daily use as binding wire.
elongation:
>15%coil
weight:
25kg ,50kg,100kg,200kg,500kg
used
1 in construction,binding,in coils, in bundles
2 handicrafts and daily life.
Packaging Detail: Galvanized Straight Cut Wire & black annealed straight Cut Wire 's packagings
Delivery Detail: 10~20 days after recieving the advance payment.
Cut Wire
Cutting Wire,Straight Cut Wire,Cut Iron Wire,Straight Cutting Wire, Iron Straight Cut Wire
Anping Weihao Hardware Wire Mesh Products Co., Ltd. ,