Steps and knowledge of solid wood floor renovation

1. Before the old floor is renovated, make sure that the house is clean and remove all the items in the house.

2, using a large floor renovation machine several times to remove the paint layer, surface layer, wood layer about 1-2 mm, and then carefully sanded to make the surface of the floor delicate and smooth to a new state. The corners of the floor are sanded using a small angle grinder for overall smoothing.

3, then putty putty, coloring, painting, waxing polishing. We must pay special attention to the step of painting. Generally, brush the primer once and apply the paint twice. If you have a flaw on the surface of the floor, you need to brush the primer several times.

4, carefully grind with water sandpaper, the surface layer is ground to a slightly rough, remove the powder.

5. Brush the paint three to four times according to the above procedure. The last pass does not need to be ground.

6. After the last coat is completely dry, put on the floor wax.

Tip: The solid wood floor should be polished from 40 mesh, 80 mesh, 120 mesh sandpaper to ensure that the surface of the floor is fine and smooth. After polishing, be sure to scrape the putty and use the putty that is mixed with the floor sawdust in Sweden. The original color of the floor can be guaranteed, the floor will not be scratched; the floor paint should use environmentally friendly water-based floor paint, which will not cause odor in the room. The floor paint must be a special floor paint, and its wear resistance can meet the requirements of the floor.

Metal Sieve


The metal sieve be made from woven wire mesh or Perforated Metal mesh, the surface treatment of metal sieve: polishing, spraying, galvanized, the color can be made as per customer's need .

Using of metal Sieve: screen glass grains, grains, raw coal, medicines and so on. It can also be used for precision filtration of metallurgy, wine industry, medicine, chemical industry, agriculture, food, grain, cement, coal, geology, scientific research and other industries.


The advantages of metal sieve:

  • Good filtering .
  • Corrosion resistance.
  • Easy to clean.
  • Acid and alkali resistance,
  • High temperature resistance
  • Uniform aperture size
  • Small orders accepted
  • Long using life.
  • Easy to use and treansport.
  • Wide application

Filter Mesh Sieve

Metal Sieve

Metal Sieve,Perforated Metal Sieve,Metal Garden Sieve,Stainless Steel Sieve,Mine Screen Mesh,Filter Mesh Sieve

ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , http://www.scwiremesh.com