The original tape on the sun board. It is not resistant to aging only for temporary protection of the edge of the board. In the installation process, the board is cut according to the size. After the material is cut, the special hole must be sealed with the engineering special tape according to the requirements of the installation procedure, and the original tape is replaced. The special tape for installation engineering should have good weather resistance, long-term use without losing its cohesiveness and mechanical strength, and when the tape is applied during the installation operation.
Pay attention to the following points;
(1) Ensure that the edges of the board are smooth.
(2) To blow all the holes clean, the compressed air must be free of any impurities and dry.
(3) Be sure to cover the tape with the profile and metal cover, and the U-shaped protection groove at the end. After the installation is completed, there should be no exposed parts.
(4) Check the tape for damage before the final installation of the pre-installation. If the damaged tape is found, it must be replaced.
Alloy Steel Pipe,Alloy Steel Pipe Price,Alloy Steel Pipe Code,Alloy Steel Pipes
Stainless Steel,Plasma Cutting Machine Co., Ltd , http://www.nbsteelpipe.com