1. Operate in strict accordance with the operating procedures.
2. Before starting the machine, press the lubrication chart to check the timing, fixed point and quantitative lubrication. The oil should be clean and free of sediment.
3, the machine tool must always keep clean, unpainted part of the anti-rust grease.
4. Lubricating oil in the motor bearing should be replaced regularly, and often check whether the electrical part is working safely and reliably.
5. Regularly check whether the V-belt, handle, knob, and button are damaged. If the wear is serious, it should be replaced in time, and the spare parts should be replenished.
6. Regularly check the repair switch, insurance, and handle to ensure reliable operation.
7. 10 minutes before work every day, lubricate the machine and lubricate the machine.
8. It is strictly forbidden for non-designated personnel to operate the equipment. It is usually necessary to stop the person from leaving the machine.
The hydraulic pendulum shearing machine is a circular arc motion, and the arc blade is quite difficult to manufacture. Generally, the horn is compensated after the blade, so the resulting gap is not accurate, and the cut sheet is not ideal. Because it is a curved movement, its blade can not be made into a rectangular shape, but should be made into an acute angle, so the force of the blade is not ideal, and the blade damage is also more serious. The domestic representative of the pendulum shearing machine is Jiangsu Zhonghang Heavy Industry Machine Tool Co., Ltd. With Shanghai Chong Shee Machine Tool Factory.
Steam Shower Room,Steam Shower Cabin,Portable Shower Room
Freestanding Bathtub Shower Panel Co., Ltd. , http://www.chbathtub.com