1. Find a professional decoration team with professional certificates for you to post.
2. Please read the instructions in the carton before paving, and follow the instructions for paving.
3. Pay attention to the name, size, and color number marked on the outer packaging. If you want to use the same size and color number, try to use the same day production.
4. Before laying, please spread out the product for every 10 square meters. If there is a significant color difference, you should promptly notify the seller to exchange.
5. To avoid damaging the brick surface during construction, use a woven bag and other items that are not easily discolored to cover the brick surface.
6. Before laying, please use cement, mortar to level the floor or wall and mark the brick size. A 3-5mm mortar joint should be reserved when marking, to prevent the adhesion coefficient and the expansion coefficient of the brick body from being inconsistent, resulting in adverse consequences.
7. It is recommended that glazed and matt bricks should be low-grade cement (325# or 325#), and polished tiles should be 525 pure grout or a mixture of cement and tile adhesive, and mix well and spread. Glazed tiles and matt bricks need to be soaked before paving, and water saturated before paving, tiles do not have to be soaked.
8. Use a wooden hammer to hit the brick surface when paving. If glue hammers are used, glue hammers should be wrapped with cloth to avoid carbon contamination of the brick surface on the glue hammer.
9. When paving, please follow the direction of the trademark of the tile blank and put it in a consistent manner to prevent the mosaic of the tiles from being unsightly.
10. When paving, the surface of the tile should be cleaned in time as construction progresses.
11. After plastering, wipe the anti-fouling agent on the brick surface with serrated or talcum powder.
12. After 12 hours of paving, you should tap the brick surface for inspection. If you find a blank tap, you should reapply it. Twenty-four hours after all tiles are tiled, they can be walked and scrubbed.
Tile Paving Decoration Material Tile Tile Cement
The production standard is BS864-2 . The Copper 90°Elbow-SR is standardized according this standard too. Our butt welded pipe fittings'size is complete.We can supply you one-stop service.
1. Corrosion resistance, good color and luster;
2. Based on high strength brass, lubricating by oil is filled in the oil grooves.3. Same performance with tin bronze bushing
4. Higher hardness, twice life time for low speed situation compare with tin bronze bushing
5. Size: Customized on your request;
BS864-2 Endfeed Copper Fitting
Bs864-2 Endfeed Copper Fitting,Reducer Pipe Fittings,Copper Long Elbow,Copper Fitting Equal Tee
Linhai Yongsheng Pipe Co.,Ltd , http://www.yspipefitting.com