The impact of a good set of software on users can be long-term, and the changes brought to users are also fundamental. I believe that with the further promotion of elecworks software, more users will benefit.
CSR Wind Power Project's Demand for Electrical CAD Software
Zhuzhou CSR Wind Power Technology Department mainly optimizes the mass production of the company's put into production and new product sets and supporting equipment to better improve and improve on-site production and process efficiency, but in the work of engineers, there is one of the most troublesome work. It is the wire harness diagram that guides production.
The process and method of assembling the CSR power distribution cabinet in the CSR era is very advanced at the beginning, with high efficiency and low error rate. That is to make a complete harness diagram when a part of the device or harness in the cabinet is advanced outside the cabinet, and print it into a picture one by one, number each line, and attach the wiring list. The wire harness can be made in advance according to the printed drawings. The wiring workers only need to put the wire harness into the wire slot, and each wire end in the wire harness will automatically find the corresponding wiring point of the device, so that the assembly wiring can be standardized by running water. Effectively improve production efficiency.
This kind of problem can come out. The design tools used by engineers of the Time Wind Power Department are all traditional CAD. The list is counted in the office. To do such a wire harness diagram, first, the engineers in the process department draw their own schematics and wiring lists. After assembling a set of cabinets, after assembling, divide the line into several bundles in the cabinet and measure the length of each line; bundle each bundle of wires that are divided into harnesses according to their assembly positions, and take out the cabinet according to a certain proportion; Finally, for each line number, add a wiring meter and print it out to the site.
The whole process takes nearly three months, and the most feared is that there are errors in the middle, or the drawings are changed. Then all the work has to be repeated... So finding an effective design tool software has become an urgent need of engineers.
Data design concept
The company's long-term use of traditional CAD and their engineers often have the same device's linkage relationship and report statistics headaches. Both the company and the customer require a fast production cycle, but the traditional CAD is to complete the device by manual labor. Associated annotations and report list statistics are time consuming, laborious, and error prone. After accessing elecworks, these problems are automatically generated by the computer, and there is more time to optimize their design. The engineers' most painstaking design work, such as statistical production wiring reports, no longer need to be used. Overworked manual labor, one-click generation of multiple types of reports to solve their last concerns. Five powerful databases make them more handy, making design no longer a drawing but a simple drag and drop, powerful macro functions, and the call of various databases to complete the design of the entire project. Seamless integration with SolidWorks allows mechanical and electrical to be separated from home.
3D wiring blocks make pre-wiring work a thing of the past
In the schematic design, elecworks makes the design no longer a simple drawing, and the efficiency is improved by half. Then the elecworks for So1idWorks module improves the efficiency of traditional pre-wiring by at least two-thirds. After the previous schematic diagram, an engineer is required to assemble a cabinet on site, and finally the assembled harness is removed and fabricated into a harness diagram principle. This is too time-consuming and laborious, and the elecworks for Solidworks 3D Routing module can solve these problems just right. All the work is done in the computer, the drawings have been changed, just re-wire the line, which not only solves their wiring harness problem, but also pre-wires the software. Help to solve the layout is not reasonable due to design, through pre-wiring, can standardize the standardization of field wiring, to ensure that all cabinets are wired and oriented, so that a large part of the post-sales problem can be solved remotely in front of the computer. . This unexpected gain made Xin Gong and his colleagues very interested.
A precise control of LCD cell gap containing liquid crystal is critical to achieving the best display performance. Spherical particles used to control the thickness of the liquid crystal layer must meet stringent requirements such as precise particle size, tight particle size distribution, suitable hardness, and excellent resistance against heat, cold and chemicals.
Plastic Spacer,Lcd Spacer,Control The Thickness Of Lcd
Suzhou Nanomicro Technology Co., Ltd. , http://www.nanomicro-technology.com