The electric pick is a hand-held electric tool. The electric pick is composed of a motor, a gear reducer, a crank connecting rod impact mechanism, a working head, a power switch, and a power connection assembly. Electric pickaxes are loved by people because of their high efficiency and easy operation. Since their birth, they have been widely used in pipeline laying, mechanical installation, water supply and drainage facilities construction, port facilities construction, interior decoration and other construction projects. There are many brands of electric picks on the market today, and the prices of different brands of electric picks are also different. Let's take a look at them in detail.
Â
　　 The price of electric picks
Â
Hangdian (HANGDIAN) 95 electric pick high-power industrial grade single-use electric pick concrete crushing hammer to send pick head 65 electric pick + pointed flat chisel + grease: RMB 688.00
WORX professional impact electric pick WU326G high power hydroelectric wall chiseling and slotting machine vertical chisel electric hammer electric shovel knife electric chisel hardware electric tool: ï¿¥ 598.00
Ai Ruize electric hammer electric pick dual-purpose impact drill multi-function high-power electric drill concrete industrial power tool standard version electric hammer: ï¿¥ 198.00
Bosch (BOSCH) electric hammer GBH2000DRE impact drill electric pick three-function electric drill dual-purpose power tool GBH2000DRE + free accessories: ¥ 699.00
Dongcheng electric pick Z1G-FF05-6 high-power single-use large electric pick slotting and demolition wall concrete multifunctional industrial-grade power tool 1050W electric draft Z1G-FF05-6: ï¿¥ 498.00
AOBEN electric hammer electric drill impact drill concrete multi-function industrial grade electric pick household high-power dual-use light type: ï¿¥ 298.00
Note: The above prices are all from the Internet, for reference only.
Â
　　 Notes on the use of electric pick
Â
1. Pay attention to lubrication
Before filling oil, be sure to turn off the power switch of the machine and unplug the power plug from the power socket.
The large electric pick (such as Z1G-65) is equipped with an oil tank, so even if it is not replenished with oil, if the daily working time is 3 to 4 hours, it can still be used for about 20 days. Before using the electric pickaxe, the oil should be injected as described below, or in a timely manner when the hammer is obviously weak.
When the rig is erected, if no oil can be seen in the sight glass of the fuel gauge (40 # lubricating oil can be used), oil should be added in time. Before refueling, the oil gauge should be removed using the attached wrench, and great care must be taken to prevent the loss of the rubber seal below. The oil level should be checked once a day to confirm whether the amount of oil is sufficient.
Small electric picks (such as Z1G-0810), with the shape of an electric hammer, should be injected with 30 grams of electric hammer lubricating oil, not exceeding 30 grams. Adding more will cause serious failure of the whole machine; adding less will cause the whole machine to heat up and burn out the internal parts. Do not use car lubricants, bicycle chain oils or other lubricants casually.
2. Check the brush
Motor brushes are consumables. Once worn to the limit, the motor may have various failures. If a self-stop brush is used, the motor will stop automatically. The brush should always be kept clean to ensure that it can slide freely in the brush holder.
3. Maintenance of the motor
The motor winding is the heart of the electric pickaxe, and it should be carefully inspected for damage and whether it is wetted by oil or water.
It can be seen from this that although the electric pickaxe has so many performance advantages, if it can not pay attention to the precautions for use, its function cannot be maximized and it is not conducive to the work process. Therefore, when using the electric pick, it should be carried out in accordance with the correct operating specifications.
The above content is related information about the price and precautions of electric picks introduced to friends. Before operating the electric pick, it must be confirmed that the chisel is tightened in the specified position. In general operation, the electric pickaxe works by vibration. Therefore, the screws are easily loosened, which may lead to disassembly or accidents. Therefore, be sure to carefully check whether the screws are tight before operating.
Brass knurled thread insert Made of brass material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Brass knurled Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
We are manufacturer of Insert Nut in China, if you want to buy Embedment Insert Nut,Brass Threaded Knurled Insert,Insert Thread Nuts please contact us.
knurled insert nut,threaded insert nut,wood insert nut,brass insert nut,furniture insert nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com