The focus of hydropower reform is not only in the construction process, but also the importance of hydropower positioning in the early stage. Imagine that if you want to put a washing machine on the balcony later, you will find that there are no outlets. If you pull a tow plate, there will be a security risk. When you think back, if you had a "preconception", leaving a socket on the balcony would not be the case. . So, how do you plan for hydropower? What are the precautions?
First, hydropower positioning is very important
1, hydropower positioning, please home appliances "talk"
When positioning water and electricity, it is generally necessary to invite all sanitary ware businesses and audio businesses. It is best to agree that at the same time, if solar energy is purchased, solar energy suppliers should be invited. If you consider using water purification equipment, you should also take the business. To find out, discuss with the plumbers the distribution and positioning of hydropower, and of course, consider the installation of gas water heaters and electric water heaters. Cupboard merchants and integrated ceiling merchants generally provide water and electricity plans. This must be remembered as a substitute for plumbers. They must follow the requirements. If they do not understand, they can call them.
2, hydropower positioning, vision to long-term
It is best to think of long-term hydropower positioning. Do not limit it to the current use requirements. For example, in the kitchen, the main considerations currently are soybean milk makers, juicers, microwave ovens, rice cookers, soup soups, etc., but I do not know what will come out in the future, so the outlet must be installed more, which is a convenience for the future. The TV background wall must have more sockets, TV, and DVD. You will find that the socket is not enough. Some places should fully consider, such as near the bathroom cabinet, the use of hair dryer and razor; and if there is a socket inside or under the shoe is not bad, you can use a baking shoe.
4, hydropower positioning, socket with switch
All air-conditioning outlets are best to use the switch socket, especially the bathroom electric water heater, with a two-stage switch with a plug is appropriate, if you want to turn off the heat, pull the plug is dangerous, and turn off the air, just press gently The switch is fine and there is no need to remove the plug. If you need a good air-conditioner while routing, move the power supply as close to the air-conditioner as possible to avoid seeing a power cord when installing the air-conditioner, leaving a pity.
3, water and electricity positioning, gas stove on the small lamp
There are spotlights or lights above the sink and gas stove, and a small lamp can be placed in the area where the vegetables are cut. The gas stove is usually in the same position as the smoke machine. Some smoke machines are equipped with spotlights, so there is no need for a separate lamp. If the purchased cigarette lighter does not have light, this place should consider installing the light, so that it is convenient to cook at night or when the light is not good.
5, hydropower positioning, switch the same level
The switch of the whole house should be basically in the same level, at least on the same facade to be basically on the same level. The outlets of the whole house should be located in the same horizontal position as much as possible. Special outlets such as air conditioners, refrigerators, and special requirements are exceptions. The color of the phase line and neutral line in the circuit reconstruction should be the same for each house. If it is possible, it is better to specify the color of the fire line, neutral line, and control line in the contract. The protection line is yellow-green in accordance with national regulations.
Second, there are still five points to pay attention to hydropower positioning
1. The first item of hydropower project is hydropower delivery and site location. Between this, you should have already got kitchen plumbing drawings designed by the cabinet designer, so basically the kitchen does not have to worry about. The location of the water and electricity in other locations in the house is best to do some planning in person, designing the placement of furniture in each room, the number of switch sockets, and whether each bedroom needs access to network cables and TV lines.
2, should pay attention to the location of air conditioning, pay attention to whether the air conditioning hole and air conditioning socket with the furniture placed in the house conflict. This is the place where most owners easily make mistakes during the renovation process.
3. Prepare a marker and measuring tape before positioning. Usually, the electrician will carry it with you, but you must also take precautions. After positioning with an electrician, be sure to confirm it again on the spot and pay attention to the location of each appliance, such as air conditioning.
4, the toilet can be left next to a socket, you can guard Washi or smart toilet.
5. Friends who love music together with Qi Jia Xiao Bian, if they have a preference for surround sound, they must communicate well with the electrician. It is not enough to leave the socket only when mobilizing the reserve line.
6, if the bathroom heating to do wind heating and air conditioning, 1.5 square line is not enough, at least 2.5 square line 5 to 6. If you do not install air warm air conditioning, Yuba and light waves heating enough.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Hydropower renovation
Clothes Dryer Parts,Copper Pipe Fitting,Clothes Dryer Condenser System,Dryer Condenser Management Device
Suzhou Green New Material Technology Co., Ltd. , https://www.szgreenvip.com