Home>Bearing knowledge>Viewing and troubleshooting in NTN bearing operations

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Viewing and troubleshooting in NTN bearing operations

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

In the NTN bearing operation, the project has the rolling sound, oscillation, temperature, and smooth condition of the bearing; the specific conditions are as follows:
1. The tumbling sound of the bearing is selected by the sounder to check the size and sound quality of the rolling sound of the bearing in the operation; even if the bearing has slight peeling and other damage, the abnormal sound and irregular sound will be announced; the sounder can be distinguished.
2. The oscillating bearing oscillation of the bearing is very sensitive to the damage of the bearing; for example, shedding, indentation, rust, crack, wear, etc. will be reflected in the bearing oscillation measurement; therefore, after selecting a special bearing oscillation measuring device (frequency analyzer, etc.) Measuring the large oscillating . 德 史 隹 隹 隹 隹 鲆 5 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭 咛迩榭. After the analysis and comparison, the discriminant specification is determined.
3. The temperature of the bearing of the bearing; usually the temperature outside the bearing can be estimated; if the oil hole can directly measure the temperature of the outer ring of the bearing; it is more suitable. Usually; the temperature of the bearing gradually rises with the beginning of the operation; 1-2 After a few hours, the stability is reached. The normal temperature of the bearing is different due to the heat capacity of the machine; the heat dissipation; the speed and load are different. If the inspection and fault handling in the NTN bearing operation is smooth and the device is suitable, the bearing temperature will rise sharply; Abnormal high temperature; it is necessary to suspend operations; take necessary precautions.
When the NTN bearing is damaged and disassembled, it can be judged according to the damage condition of the bearing.
1. The rolling surface outer metal bearing bearing rolling body and the inner and outer ring raceway surfaces all receive the effect of periodic pulsating load; then the contact stress changes during the attack cycle. When the number of stress cycles reaches a certain value; in the rolling body or inside and outside If the bearing load is too large, the fatigue will be aggravated. Others; the bearing device is not correct, the shaft is tortuous; the raceway will be off the surface. The bearing raceway will be worn off. The accuracy of the descent axis; the tissue oscillation and noise.
2. . Bearing burn burn bearings have tempering color on the raceway and roll body. The cause of burn is usually lack of smoothness, smooth oil quality does not meet the demand or transformation; and the bearing device is too tight.
3. The plastic deformation bearing has uneven pits on the touch surface of the raceway and the roller; it clarifies the plastic deformation of the bearing. The reason is that the bearing is under the effect of large static load or impact load; the partial stress of the external work exceeds the yield of the data. Limit; this condition usually occurs on bearings that rotate at low speeds.
4. The cause of the crack in the bearing ring crack bearing seat can be that the bearing cooperation is too tight; the outer ring or inner ring of the bearing is loose; the bearing part of the bearing is deformed; the outer surface of the bearing is poorly processed.
5. The reason why the cage is broken is that it is smooth and lacking; the rolling body is broken; the seat is inclined.
6. The reason why the metal of the cage adheres to the tumbling body is that the tumbling body is stuck in the cage or is lacking in smoothness.
7. Severe wear of the raceway can be caused by foreign objects falling into the race; lack of smooth oil or smooth oil trademark is not suitable.
The main factors affecting the damage of NTN bearings are: load condition, smooth condition, equipment condition, environmental conditions and raw materials or production precision.

---

Recommend to friends comments close window

Bearing related knowledge

US MPIF Standard 35 "Powder Metallurgy Self-Smooth Bearing Material Standard" The production of ferrules in rolling bearings, the use of smooth grease, the production process of the door bearing and the quality control "classification of joint bearings"

This article links to http://
Please indicate the bearing network http://

Previous:Example of the scale of use of oil-free bearings Next:The key to packaging of bearing products

High Power Led Grow Light

Philizon focus on Greenhouse High Power LED Grow Lights and Full Spectrum LED Grow Lights Manufacturer China,Produce The Best Yields, Run More Efficiently, Use Half The Electricity Of Double Ended HPS.

LED grow lights are the most recent mass produced lamp on the market,although many people have not begun using them yet. Since the tiny LEDs might not be the first thing that you think of when you picture an indoor grow up,that is understandable.In reality,however, they truly are some of the most powerful,effective,and space saving grow lights that you are going to come across throughout your growing career.

Advantages

Plug with listed certificate safe to use.

Full Spectrum High Power LED Grow Light and High PAR for Plants growth.

Product Images

The Plug you can choose

Ageing Test

Application

Our professional High Power LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.

Package

Quality Control Systems

Warnings:

1.lndoor use only.

2.To avoid being damaged,do not use water or drip irrigation while using.

3.Sunshine lighting time should be 12-18 hours.

4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.

5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.

6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.

Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.

New Design Grow Light,High Power Grow Light,High Power Grow Lamp,Led High Power Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com