The quality of the tiles is uneven. What should we pay attention to when purchasing tiles? What are some tips? Today, I have collected some tips for tile purchase to share with you, I hope to help you.
1, look - look at the tile surface
The higher the gloss, the better the sintering density of the tile. A good tile, the glazed surface presents a crystal clear feeling, reflecting the light like a mirror under the illumination of the light, the poor tile, the glaze is dull and dull.
2, listen - listen to the sound to distinguish between good and bad
Separate with one hand and five fingers, and the other hand taps the tile surface. The sound of a good ceramic tile is relatively crisp and bright; the poorer tile gives a low density and the sound is dull.
3, fall - good tiles are not afraid of falling
A good tile will not break any damage after a vertical vertical drop, which is determined by the strength of the tile. Good tile strength, poor tile strength, low break
4, said - good tile weight
Good ceramic tiles have high density, relatively heavy weight, relatively solid thickness, uniform thickness, and no corners and other defects. Poor quality tiles are relatively light weight.
5, wet - tile water absorption experiment
After the high-quality ceramic tile is fired at a high temperature, the water absorption rate is low, and the water does not spread on the ceramic tile, indicating that the ceramic tile does not substantially absorb water. But the poor tiles, after the water is poured down, there will be obvious water absorption reaction.
6, pressure - tile bearing test
The tiles are suspended and the people stand on the tiles. If the tiles are basically not damaged or cracked, the load-bearing capacity of the tiles is very good. Poor tiles are prone to breakage or cracking and cannot withstand heavier weights.
7, grinding - corrosion and wear resistance test
Use a pen to write a mark on the brick, use a common rag to wipe, remove the dirt, leaving no trace, indicating that the tile is corrosion-resistant. Use a common key to wipe the surface of the brick hard, leaving no scratches on the surface, indicating that the brick has strong wear resistance.
8, pick - choose a good base
The color of a good blank is a color between beige and beige. If the color of the base is yellowish or blackish, it means that the product contains too much impurities, which is not a good product.
Conclusion: After reading the above article, I believe that you have a certain understanding of the purchase of tiles, I hope to help you buy tiles.
[Follow the WeChat public number " Jiuzheng Ceramics Network" ; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzheng ceramics network exchange group: 80123558 】
Bathtub Faucet,Tub Faucet,Tub Diverter,Jacuzzi Tub Faucet
Zhejiang minmetals huitong import and export Co., Ltd , https://www.zjminmetals.com