Content hint: dust loss: suction loss during cooling process. First, the dust is not enough for Shaklong dust collection, and the dust is discharged into the outdoor; first, the dust is fouled in the cooling air duct and Shakron, causing loss.
In the feed mill, why does the quenching, granulating and cooling process cause loss of raw materials? How can we make less loss of raw materials?
1. Clean the pot and material loss caused by the conditioner and the granulator: control the temperature of the conditioner, thereby reducing the residual amount of the conditioner, and the number of cleaning can also reduce the
2, water loss: Although the granulation process will add steam, but after cooling, the moisture content of the granular product is lower than the moisture before granulation, so the raw material moisture needs to control
3, dust loss: the suction loss of the cooling process, first, the dust collection is not sufficient, the dust is discharged into the outdoor; first, the dust is fouled in the cooling duct and Shakron, causing the loss of
4, regranulation loss: due to improper operation of the granulator, leading to re-baking, re-granulation, so it is necessary to strictly follow the granulation operation regulations, the efficiency is maximized
5, cooling time control loss: seriously study and understand the characteristics of cooling, in order to achieve the best performance of the cooler
Color Pvb Film,Vanceva Color Pvb Interlayers,Color Film Band,Color Pvb Film Car
HUAKAI FENGSHI TECHNOLOGY (CHONGQING) CO., LTD. , https://www.cqhkpvb.com