[Abstract] You may be worried about the construction quality of the construction site, the workers are not seriously done, or the materials they bought are shoddy and short. The following will introduce the most common quality "funny" in renovation construction.
Problem 1, rough covert process
The process of the ceiling surface can also be seen, but the inherent quality is much rougher. Although not affecting normal use, the overall aesthetics are greatly reduced.
The expert reminds: In the hidden part of the project, the basic leveling should be done within the visible range, and then the construction of the suspended ceiling should be carried out to ensure that the overall appearance is consistent.
Problem 2, wood surface paint white
After the production of the woodware is finished, the enamel surface in the oil coating process is whitened and cannot be removed by any means.
Experts advise that oil decoration should be performed in accordance with the processes of oil decoration, drying, grinding, and refinishing. The situation of whitening is caused by the fact that the paint has not yet dried and begins to polish or rain. Everyone must pay attention when making woodwork.
Problem 3, ceiling leak
After the construction was completed, the aluminum gussets of the suspended ceiling were 2 cm from the wall, leaving unsightly cracks.
Experts advise: The installation of ceilings should be followed by laying in short distances. The special keel must be added in the middle, and the sturdiness of each keel must not be greater than 40cm, so that similar situations can be avoided.
Problem 4, leveling "injustice"
This is a real sample after the completion of the project. Even without any tools, there is a clear gap between the wall and the ground.
Experts reminded that: When the wall surface meets the ground, the harmony and unity of points, lines, surfaces and angles should be realized. The surface is obviously uneven. This project certainly cannot meet the acceptance criteria.
Problem 5: Poor plaster stitching
When splicing the plaster line, workers are free to cut with a knife, resulting in loose connections, leaving unsightly and obvious gaps, which is unsightly.
Experts advise: To regulate the construction, we must strictly implement the procedures and processes specified in national and local standards. According to the Shanghai 315 acceptance standard, the surface of the plaster line should be clean, with clear patterns, tight joints, no gaps, distortions, missing edges, and other defects.
Mastered the above points of decoration, change can be found in the renovation process and correct the problem in time, so that the quality of decoration has been improved.
Decoration catty entrance decoration restaurant decoration paint
One-hole Basin Faucets are much more user-friendly than the rest basin faucets. Installation is simple and requires the drilling of only one hole.
One-Hole Basin Faucets,Chrome Sink Basin Faucet,Multifunctional Bathroom Basin Faucet,Bathroom Single Handle Basin Faucet
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com