Rotary vane vacuum pump deformation many, many single rotary vane vacuum pump together, can be made of multi-chamber rotary vane vacuum pump, rotary vane vacuum pump and other pumps can be combined together to form a combination of pump or pump group (such as Mechanical pump - diffusion pump extraction unit). Side eccentric pump rotary vane vacuum pump structure is improved, thereby enhancing the performance of the original design type. It can also be used on a number of simultaneous venting devices. It is used in the same range as other rotary vane vacuum pumps. First, the multi-chamber rotary vane vacuum pump vacuum tube vacuum tube electrical components to use more exhaust, including mechanical pump with ten-room pump, multi-chamber rotary vane vacuum pump, in order to conduct multiple independent pumping. 1. Multi-chamber rotary vane vacuum pump working principle Multi-chamber rotary vane vacuum pump and single-stage or two-stage rotary vane vacuum pump works the same. The difference is that: it is in a common base with the same motor dragged by a number of independent studio (single-stage rotary vane vacuum pump), each studio in the entire process of extraction can be non-interfering with each other directly A container is evacuated. So it is called multi-chamber rotary vane vacuum pump. 2. Multi-chamber rotary vane vacuum pump structure It is immersed in the tank and the cabinet by the two independent main studio composed of two. These independent studios are a single-stage rotary vane vacuum pump consisting of the main components of the pump body (chamber), rotor, rotary vane, spring, filter (net), exhaust valve and so on. These separate studios are connected in series into a pump set and bolted to the frame inside the box. Second, the side of the eccentric rotary vane vacuum pump In front of a lot of references to the rotary vane pump in the side of the eccentric pump, because it is designed and manufactured by Nanguang Machinery Factory a new type rotary vane vacuum pump. Its advantage lies in the comprehensive technical index is relatively high, in some aspects, such as specific power, specific weight, fuel injection, fuel consumption more than the same products, and surpass that of some capitalist countries. Third, the rotary vane vacuum pump to improve the trend Rotary vane vacuum pump and other types of mechanical pump than though there are many advantages, but a lot of shortcomings, especially from the production requirements are far apart. For example, in the corrosion-resistant, wear-resistant, small size, light weight, low noise, small vibration, automatically prevent the oil reflux, remove the oil vapor reflux and so on, need to work hard. In order to meet the needs of instrument development, a small rotary vane vacuum pump below 18 liters / second has been developed to miniaturization instrumentation. Old-fashioned mechanical pump, pumping in, with the vacuum increased, the pumping speed dropped a lot. In recent years, the pumping speed curve (horizontal line) of the pump extends to almost 1 × 10 -3 mm in recent years due to the reduction of oil vapor backflow and the adoption of new technologies (such as the construction of a three-turn rotary vane vacuum pump) 3 Torr. In the study of clean vacuum, in order to avoid the reflux of oil vapor, it was suggested that high-vacuum sealing of rotary vane vacuum pump adopts solid lubricating material (dry level), while conventional oil seal rotary vane vacuum pump is used as pre-stage (oil seal level) Two-stage pump Of course, a more thorough solution to the oil vapor reflux or trying to develop oil-free mechanical vacuum pump. At home and abroad have been studied for many years, developed a lot of types. However, the pump that can start pumping air from the atmosphere and can work continuously and has the similar performance with the existing oil seal mechanical pumps is still under development without any formal products. Believe that with the progress of vacuum technology, good performance, can adapt to a variety of job requirements rotary vane vacuum pump will appear.
Liquid Reservoir
4 Channel Reagent Reservoirs,8 Channel Reagent Reservoirs,12 Channel Reagent Reservoirs,96 Well Reservoir,384 Well Reservoir, from Yongyue Medical, is made of strong clear polypropylene (PP). Low profile designation which is suitable for small volume robotic tips used in high flux instruments. In the automatic pipetting process, the reservoir can perfectly overcome the surface tension of the liquid and minimize residual liquid
Our Reservoir Plates are perfect for storing volumes of samples to be pipetted into other microplates for further applications.
These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Pyramid channel bases are best for small volume recovery. The standard SBS footprint ensures its compatibility with automation.
Our sturdy and reusable reagent reservoirs can stand-up to autoclaving, exposure to temperature extremes, and chemicals. Made from polypropylene these reservoirs offer a stable base that makes them suitable for manual procedures as-well-as automation.
These fully automation compatible reservoirs feature an SBS footprint and can be used in plate handlers or stackers. To minimize space on platforms (when a stacker is not in use) or under hoods, these reservoirs can be filled and stacked.
High Quality PP, Stable with Lab Common Reagents, including DMSO, etc
Conical Bottom Design To Save Expensive Reagents
DNase/RNase & Pyrogen Free
Stable at -80℃
Conformed to ANSI/SBS Standards96 Well Reservoir,Reagent Reservoir,Reservoir Plate,12 Channel Reservoir,8 Channel Reservoir,384 Well Reservoir
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuetip.nl