Toilet knowledge entry series classification articles

1, according to the structure of the toilet: toilet can be divided into separate toilets and one-piece toilet two, in the choice of separate toilet or one-piece toilet, mainly to see the size of the bathroom space. In general, split toilets take up more space, and one-piece toilets take up less space. In addition, the separate toilet shape should look more traditional, the price is relatively cheap, Siamese toilet should look new and upscale, the price is relatively high. Consumers can decide according to their own circumstances. 2, according to the toilet outlet there is drainage, also called bottom row and horizontal drainage (also called back row) points. The horizontal drain outlet is on the ground, and a hose is used to connect with the outlet of the toilet after use. The drain at the bottom of the row, commonly known as floor drain, is used to align the drain outlet of the toilet with it. Generally older buildings are horizontal rows. Most new buildings are drainage systems at the bottom. When choosing a toilet, you must determine the distance between the center of the floor drain and the wall. The distance is 220mm, 305mm, 400mm and 420mm. And other specifications. There may be some differences in different areas, so be careful not to make a difference when installing, otherwise it will affect the drainage effect.
To measure the distance from the center of the outlet to the wall behind the tank, buy the toilet of the same type to “close the seat, otherwise the toilet cannot be installed. The outlet of the horizontal drainage toilet should be equal to the height of the horizontal outlet, and it is better to be slightly higher. In order to ensure the smoothness of the sewer, some of them are toilets with a height of 30 cm: toilets with a height of 20 to 25 cm, toilets with a distance of more than 40 cm, and toilets with a distance of more than 40 cm.
After the renovation is completed, be sure to test the drainage, the method is to install the water tank accessories, filled with water, and then put a toilet paper in the toilet and drop a drop of ink, a discharge without leaving any traces, indicating the smooth water, while paying attention to the toilet in the product Less water is better.
3, pay attention to choose different drainage methods: toilet press water can be divided into "flushing type", "siphon flush type" and "siphon swirl" and so on. The flush type and siphon flush type water injection volume is about 6 liters, and the sewage discharge capacity is strong, but the sound is large when flushing; while the swirl type uses a large amount of water at a time, but it has a good mute effect. Consumers may wish to try straight into the siphonic toilet and go straight to the siphonic toilet. It combines the advantages of both straight flush and siphon. It can not only quickly flush dirt, but also play a role in saving water.
Generally, the horizontal row is selected to be flush type. It uses the impulse of flushing water to directly discharge the dirt; the bottom row of siphon drains is designed to use rinsing water to form a siphon effect in the sewage discharge pipe to discharge the dirt. The flushing method requires that the amount of water used must reach the specified amount in order to form an effective siphon effect. The flushing sound is louder and the impact is larger. Most squat toilets use this method; the siphoning type has a much smaller flushing sound than the flushing type. Siphon type can also be divided into ordinary siphon and mute siphon. Ordinary siphon is also called siphon jet. The water spray hole of the toilet is at the bottom of the sewer pipe. The water jet hole is facing the water outlet. The silent siphon is also called siphon siphon. It is similar to the ordinary siphon. The main difference is that the water spout is not directly facing the water outlet, some are juxtaposed with the water outlet, and some water is discharged from the upper part of the toilet to form a vortex and discharge dirt. Most of the products sold on the market today are siphonic toilets.
4, need to understand the toilet's displacement. The government stipulates that toilets below 6 liters should be used. Most of the toilets on the market today are 6 liters, and many manufacturers have also launched toilets that are separated by size. There are two switches, 3 liters and 6 liters. This design is more conducive to saving water. In addition, there are manufacturers to launch a 4.5 litre, when you choose, it is best to do a flush experiment, because the amount of water will affect the use of the effect.
In addition, the toilet tank fittings are easily overlooked. In fact, the tank fittings are like the heart of the toilet and are more prone to quality problems. When buying, pay attention to the selection of good quality accessories, low water injection noise, sturdiness and durability, can withstand long-term water immersion without corrosion, no scale.

Space effect figure decoration company toilet room decoration design switch bathroom design