When the renovation is carried out, netizens have shown examples of decoration and woodworking construction

53, the best use of dry larch keel

54. After the large wooden plate is bought, it must be sawn and dried.

55. The woodwork enters the field first to play the horizontal line of the house

56. When the color panel comes in, you must buy a paint brush again to prevent it from being contaminated.

57. The ceiling fan cannot be installed on the ceiling keel

58. The color panel must be pre-selected during construction

59. The ceiling of the suspended ceiling must not be greater than 300 from the wall

60. The gypsum board should be fixed with a countersunk head tapping screw, enter the board surface 1~2MM, and do rust treatment, can not use the gun nail

61, the distance between the plasterboard nails shall not be greater than 200

62. The gypsum board has a 3mm seam with the wall for crack prevention

63, the best angle of the gypsum board at the corner to do protection

64. The paint on the top and bottom of the wooden door should be painted

65, the bottom of the bathroom door cover to brush waterproof

66. The size of the door should be the same

67, furniture as far as possible not to do carpentry, doing also can not do

68, cabinets try to buy the whole, woodworking is not good, the design is not OK

69. Each medium size must be considered well, and it will be troublesome to change it.

70, do not do the dark track to do their own move the door, no way to repair later

71. If the bathroom is small, try to make a sliding door, do not open the door, take up the place

72. Uncertain woodwork must be communicated with the foremen more than ever. Do not let them make their own claim

73. Money is the hard truth in your hand

74. There are children at home and less use of glass

75. Make sure the workers have a good look at the drawings

76, kitchen drawer is very useful

77, floor wood keel flatness is 5MM

78, wool floor to be paved 30 degrees or 45 degrees, between the board and the board to stay 2 ~ 3MM, stitches should be staggered

79, to leave 8 ~ 10MM seam between the floor and the wall

80. Expansion joints should be considered when the length of the composite floor exceeds 8M

81. Minimize the use of MDF for door covers

82. The hinges and hardware must be used well

83. The Yuba should be mounted on wooden keels and cannot be directly attached to ceilings.

Nature Flooring Del flooring Painted glass Wooden doors House Furniture Glass sliding doors Drawers Cabinets Doors Kitchen cabinets Doors Glass Furniture Doors Glass doors Kitchen glass Sliding doors Bathroom doors Bathroom doors Dimensions Bathroom dimensions Bathroom ceilings Overall bathroom Bathroom design Toilets Waterproof bathroom Sliding doors