Luminous pigments is by absorbing various visible light emission function, and can be reused many times. The product does not contain radioactive elements, can be used as an additive. The appearance of color pigment exhibits itself in the light, then dark emit different colors of light, showing excellent low-level emergency lighting, marking and instructions decorative landscaping features.
Â
Luminous pigments ingredients
| Ingredients | The proportion |
| Strontium aluminate | >=93% |
| Manganese oxide | <=3% |
| Europium oxide | <=2% |
| Dysprosium oxide | <=2% |
| All the proporation are in accordance with the terms of oxide | |
| Conventional do not have heavy metals, rare earths dysprosium and europium is our raw material, strictly speaking this is heavy metal. Except for these two, if it does not contain heavy metals  | |
Luminous pigments applications
1. Luminous Vinyl Film
2. Luminous Emergency Evacuation Product
3. Luminous Road SignsÂ
Other Products available:
1.  Luminous self-adhesive vinyl Tape
2.  Luminous PVC rigid sheet
3.  Luminous Aluminum sheet
4.  Luminous Indication for Emergency Evacuation
5.  Luminous Indicators for Fire Facilities
6.  Luminous Pebble
7.  Luminous master batch
8.  Luminous Reflective tape
9.  Luminous RubbleÂ
Tips for luminous pigments use
1. About use and storage of containers, if you use iron or stainless steel and other metal containers containers, luminescent powder will be affected, the color is dimmed and even black. It is recommended to use a glass or plastic container.
2. About Grinding, solvent system common for emitting powder may be ground to obtain better dispersion. But with the water-based coated luminescent powder is not grinding, and polishing will destroy its aqueous envelope, thus losing the waterproof effect.
3. Need now with the current. It is recommended to use within 2Â hours When luminescent powder mixed solvent. If the mixed solution was left for too long, due to the large proportion of the light-emitting powder, it may appear to sink even the phenomenon of agglomeration, once caking, stirred again might not be so luminous powder uniformly dispersed in the solvent.
4. The light emitting powder temperature, can be used for the production of mosaic, calcined with mosaics. Luminous powder at temperature of 800 degrees is not affected, but the performance of more than 1,000 degrees luminescent powder will be subject to greater damage.
5. When the light emitting powder used outdoors, it is recommended to use waterproof luminous powder, and appropriately increase the proportion, such as 1.2: 1 (the actual percentage may refer to different solvents of different treatments). At the same time, the thicker the coating thickness. Surface coating layer and a layer of transparent varnish to better protect the coating after the coating is dried.
Main advantages and technical instructions of the Customized Arrow Board:
1. Mainly used for engineering vehicles, municipal vehicles, garbage trucks, etc. Using Taiwan Epistar chip lamp beads, using C50 Led Pixel Tube arrangement, each lamp tube has 6 lamp beads, super high brightness, good visual effect.
2. The shell is aluminum, and the shell is aluminum. It is fully enclosed, all-weather, weatherproof, with good oxidation resistance, and the equipment will not fade or rust during the use period.
3. Completely waterproof: waterproof glue is applied to the connection between the display and the cabinet on the surface of the product to improve the waterproof performance of the product.
4. This product is powered by solar energy, which is environmentally friendly.
5. Strict aging: verify the aging 24 hours before the product is shipped, and the performance is more superior!
6. Display mode: there are three display modes, namely full light, left arrow, right arrow
7. Easy to install: It can be put on the road or on the car by using the bracket to move easily. There is an aluminum groove on the back, and it can also be installed with a back hoop.
Shenzhen Wide Way Optoelectronics Co., Ltd., a provider and manufacturer of high-quality traffic lights!
Field Installation Instructions for the portable yellow flashing solar panel Arrow Board led lights:
The installation method of the vehicle-mounted portable yellow flashing solar panel arrow board led lights can be customized, and the most commonly used is the hoop installation.
Customized Arrow Board
Arrow Sign Board,Traffic Led Arrow Board,Led Arrow Sign Board,Led Arrow Board Lamp
Shenzhen Wide Way Optoelectronics Co., Ltd. , https://www.wdmtrafficlight.com