Access Control System Introduces Bluetooth Technology

Access Control System Introduces Bluetooth Technology With the continuous development of science and technology and the improvement of people's safety awareness, the use of access control systems in modern offices and people's daily lives is becoming more and more widespread. Bluetooth technology has also been successfully applied to access control systems.

Bluetooth (Bluetooth) is a kind of low-power, short-range wireless communication technology standard. Its essence is to establish a common wireless air interface and its open standards for control software, so that communications and computers can be further integrated, so that different manufacturers can produce Portable devices can have interoperable and interoperable performance at close range without wires or cables connected to each other. In general, its connection range is between 10 cm and 10 m; if the transmission power is increased, the connection range can be extended to 100 m.

The transmission distance of devices using Bluetooth technology is not very long. In order to solve such problems, it is often equipped with certain relay devices during actual use. In this case, the entire connection can effectively achieve interoperability and improve the reliability of the system. In addition, the use of repeaters can provide a good opportunity for future product upgrades. By adopting Bluetooth technology, the installation cost of products will be significantly reduced, mainly in terms of labor costs and resource costs. The reduction in costs can also in turn promote the sales of products, which in turn will reduce other related costs.

In the access control industry, the vast majority of systems use RS-232 and RS-485 hardware interface standards to connect various readers and monitoring devices to each other. If the facilities that need to be monitored are not equipped with the necessary lines in advance, we have to create holes in the buildings so that suitable monitoring equipment can be installed. Now that we have Bluetooth technology, we can avoid this phenomenon. Not only that, Bluetooth technology also provides us with more secure communications security. Access control devices using Bluetooth technology can be used in many areas. Here are some examples of these: Gating areas: As mentioned above, products using Bluetooth technology can greatly ease the wiring work in smart card systems, making the replacement of products become very easy.

Industrial automation: In this area, Bluetooth devices can replace the connection between the computer and other devices, making its connection more reliable. In addition, we can also use Bluetooth to build a wireless LAN. Energy, Oil, and Natural Gas: There are generally a large number of valves, pipes, and electrical lines in these areas. We can configure Bluetooth-enabled sensors at key locations so that we can keep abreast of the above-mentioned conditions. In the event of a dangerous situation, the relevant personnel can respond in the shortest possible time.

FIN is a weakness in cyber attacks. Attackers can easily obtain the user's FIN. The solution to this problem is: the choice of PIN should be as long as possible, the longest can choose 128-bit length. In addition, we can also use some key exchange protocols. Key exchange protocols, etc. The address of the Bluetooth device will also give the cyber attacker an opportunity. The device address serves as the unique identifier of the identification device. If it is forged, the communication process using the device address as a parameter will have no secret. The countermeasure for this kind of security problem is to use different link keys for each communication, especially when communicating with different devices.

As an emerging technology, compared with other similar technologies, Bluetooth technology considers many factors in the design process, and has the following main features: high operating frequency, strong anti-interference, easy use, voice support, and no need for base stations. ; Small size, low power consumption; can be multi-way multi-directional link; strong confidentiality.

The Steel Plate is a kind of flat steel with width-thickness ratio and big surface area, which can be divided into the thin plate and thick plate according to thickness.

A thin steel plate is made by hot roll or cold drawn with thickness of 0.2mm to 4mm and width between 500mm to 1400mm. Thin steel plates are made from different billets based on its their applications, and usually made from plain carbon steel, excellent carbon steel, structural alloy steel, carbon tool steel, stainless steel, spring steel and electrical silicon steel, etc. They are mainly used in automotive, aviation, enamel, electrical, and engineering industries, etc. A thin steel plate should have pickling, galvanizing and tinning treatments after rolling but before delivery.

A thick steel sheet has thickness over 4mm. In practice, we often refer steel plates whose thicknesses are less than 20mm as medium plates; steel plates with thickness between 20mm and 60mm as thick plates; steel plates made by heavy plate mills with thickness over 60mm as thick steel plates. And the width of thick plates ranges from 0.6mm to 3.0mm. Thick plates are classified into ship steel plates, bridge steel plates, boiler steel plates, pressure vessel steel plates, checkered steel plates, automobile leaf-spring, armoured plates and cladding steel sheets.

 

 

Product
Hot rolled q23 q345 q345b Steel Sheet/plate
Standard 
AISI,ASTMA283/A283M,A572/A572M,A36/A36M,A573/A573M,A529/A529M,A633/A633M, A678/A678M,A588/A588M,A242/A242M,GB/T700-2006,GB/T3274-2007,GB912/2008,JISG3101-2004,EN10025-2-2004,JISG3106-2004,JISG3114-2004,GB/T4171-2008,etc
Material
Q235B,Q195B,A283 GR.A,A283 GR.C,A285 GR.A,GR.B,GR,C,ST52,ST37,ST35,A36,SS400,SS540,S275JR,
S355JR,S275J2H,Q345,Q345B,A516 GR.50/GR.60,GR.70,etc 
Thickness
0.1-500mm
Width
100-3500mm
Length
2m,2.44m,3m,6m,8m,12m,or rolled,etc
Surface
Black painted,PE coated,Galvanized,color coated,anti rust varnished,anti rust oiled,checkered,etc
Package
Standard export package,suit for all kinds of transport,or as required.
Container size
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)
Price term
Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc
Payment term
T/T,L/C,Western Union,D/P, etc
MOQ
15 ton
Application
steel plate are widely used in shipping building,engineer construction,mechanical manufacturing, the size of alloy steel sheet can be made according to clients required.

 

Hot Rolled Steel plateCold Rolled Steel sheet & plateCold Rolled Steel plate

 

Application:

Cold Rolled Steel Sheet & Plates are used in thousands of applications.

The following gives a flavour of the full range:

Domestic – cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades

Architectural/Civil Engineering---- cladding, handrails, door and window fittings, street furniture, structural sections, reinforcement bar, lighting columns, lintels, masonry supports

Transport ---- exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles

Chemical/Pharmaceutical ---- pressure vessels, process piping.

Oil and Gas ---- platform accommodation, cable trays, subsea pipelines.

Medical ---- Surgical instruments, surgical implants, MRI scanners.

Food and Drink ---- Catering equipment, brewing, distilling, food processing.

Water ---- Water and sewage treatment, water tubing, hot water tanks.

General ---- springs, fasteners (bolts, nuts and washers), wire.

 

If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steel Sheet & Plate

Steel Sheet,Steel Plate,Cold Rolled Steel Sheet,Cold Rolled Steel Plate

Shandong Vantage International Trade Co., Ltd. , http://www.sdvantage.com