Ji Yulu's maintenance skills

Ji Yulu's maintenance skills :

I. Temperature: It is suitable to grow in the environment of warm winter and cool summer. When the plant is in a dormant or semi-dormant state at high temperature in summer, the growth is slow or completely stagnant. It can be kept in a ventilated, cool and dry place, and avoid sun exposure and sun exposure. Long-term rain, do not pour too much water, stop fertilizing, and then resume normal management after the autumn cool. In winter, the minimum temperature is around 8 °C, and during the daytime above 20 °C, the plants can continue to grow. Water should be watered normally. If watering is controlled, the plants will go to sleep.

It can withstand low temperature of 3 °C ~ 5 °C, even low temperature of 0 °C. If it is in the environment below 5 °C for a long time, the plant will not die, but there will be traces of frostbite on the leaf surface, especially the leaves around the plant are easy. Frozen, its frozen leaves are white and cannot be restored to the original. Therefore, Yulu's wintering temperature is best maintained above 5 °C.

Second, the light: sensitive to light, if the light is too strong, the leaves grow poorly, light reddish brown, sometimes strong direct light will burn the leaves, leaving unsightly marks. However, the cultivation site is too sloppy, and the plant type is loose, not compact, the leaves are long and thin, and the transparency of the "window" is poor. It is difficult for such plants to restore the original appearance, and only the leaves of the batches are slowly falling off. Then grow a strong new leaf. The plants growing in the semi-shade have thick and full leaves and high transparency. Therefore, a layer of shading net can be added from May to September, and the shading net should be removed from October to April next year to give full illumination.

Third, the soil: suitable for loose and fertile, good drainage and permeability, containing lime, and has a coarser grain of sandy soil growth. Commonly used 2 parts of humus soil, 3 parts of coarse sand or vermiculite mixed soil, and mixed with a small amount of bone powder. High-grade varieties such as 'Yu Lu Shou Jin' and 'Mao Yu Lu' can also be planted with synthetic materials such as red jade soil, blue stone and physalis, but an appropriate amount of peat soil should be added to increase the organic matter content of the soil.

4. Watering: The principle of watering in the growing season is not to be poured or poured, and the principle of pouring through is to avoid water accumulation, and not to rain, especially not to rain for a long time to avoid rotten roots. However, it is not suitable for long-term drought, otherwise the plants will not die, but the leaves are dry and the leaves are dull. When the air is dry, it can always spray water to the plants and the surrounding environment. During the growing season, the plants can be covered and covered with a transparent colorless beverage bottle cut off in the upper part to make them grow in a humid air environment, which can make the leaves full. The "window" is more transparent. However, the bottle must be removed during the hot summer season to avoid plant death due to hot and humid conditions.

V. Fertilization: In the growing season, for the growing plants, a decomposing thin liquid fertilizer or a low-nitrogen high-phosphorus-potassium compound fertilizer can be applied once a month. The new potted plants or the weaker plants do not need to be fertilized. It is not necessary to apply fertilizer during the summer heat or when the winter temperature is low. Fertilization time should be chosen in the morning or evening.

Sixth, Tip: Because the root system of Yulu will secrete acidic substances, causing acidification of the soil, making the roots aging hollow, can be changed once a year in spring or autumn. If the growth of the plant is stagnant during the growth period and the leaves are dry, it is likely that the root system is damaged. The root system should be turned over in time. When the basin is turned over, the aging, hollow roots are cut off, the long roots are cut short, the thick white new roots are retained, and the new cultivated soil is planted.

Veneer Mdf board is mainly used for laminate floor, door sheet, partition, furniture,  decoration of indoor&outdoor, office and home furniture, sould equipment, inside decoration of the car, antistatic floor of computer room, panel, security door, wall board etc, and also used for the package and the basic material of laminate Wood Flooring.

Veneer MDF Board is easily for coating finishing, every coating, oil paint are also on the surface of Veneer  MDF , is the fist choice as the basic material of painting effects.Veneer MDF is one kind of beautiful material of decoration. Smooth and flat surface, fine texture, steady property. All kinds of venner, gummed paper, light metal plate, melamine paper etc, is also can on the surface of the Plain MDF . Plain MDF is made from acoustical board after drilling, is used in construction decorative progress, such as meeting room, displaying room, office etc. And we have  Veneer UV MDF and Sapele Veneered MDF.

LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Plywood , venner,MDF board, Particle board, Door Skin , Blockboard , Finger joint board, OSB , paper, Steel etc.

Veneer Mdf Details:

size:1220*2440MM 1830*3660MM 1830*2440MM 915&610*3660MM 1220*2800MM 1525*2440MM

THICKNESS:2MM-35MM

MATERIAL:POPLAR, COMBINE, PINE

GLUE:E0, E1, E2, FIRE-PROOF

CERTIFICATION:CARB, FSC, CE, SON CAP

veneer mdf

Veneer Mdf

Veneer Mdf,Veneer MDF Pegboard,Veneer UV MDF,Sapele Veneered MDF

Luli Group Co.,Ltd. , http://www.cnluli.com