Type ITEM NAM: PUSH SWITCH
(1) RATING voltage and current specifications: 3A125VAC/1A250VAC
(2) ELECTRICAL PERFORMANCE Electrical performance:
TEST CONDITIONS test conditions | PERFORMANCE performance | |
Contact resistance CONTACT RESISTANCE | 1KHZ ± 200HZ or DC. 5V.1A 1KHZ ± 200HZ OR DC. 30V.0.1A | 50mΩ or less 50mΩ MAX |
Insulation resistance INSULATION RESISTANCE | DC 500V within 1 minute ± 5 seconds DC. 500V FOR 1 MINUTE ± 5 SECONDS | 100MΩ or more 100MΩ MIN |
Withstand voltage DIELECTRIC STRENGTH | AC. 500V (50-60HZ) within 1 minute AC. 500V (50-60HZ) FOR 1 MINUTE | Insulation does not destroy NOT BREAKING INSULATION |
(3) MECHANICAL CHARCTERISTICS Mechanical properties:
TEST CONDITIONS test conditions | PERFORMANCE performance | |
Durability DURAHILITY (WITHOUT LOAD) | No load 10,000 times back and forth, speed 15-15 times per minute continuous action. 10,000 CYCLES OPERATLON AT A RATE OF 15-18 CYELES ​​PER 1 MINUTE WLTHOUT LOND. | Contact resistance: 50mΩ or less CONTACT RESISTANCD: 50mΩ MAX Insulation resistance: 100MΩ or more INSULATION RESISTANCE: 100MΩ MIN Withstand voltage: Insulation does not break within 1 minute of AC500V VOLTAGE PROOF: AC 500V IN 1 MINUTE NOT BREAKING INSULATION |
(4) ENDURANCE weather resistance:
TEST CONDITIONS test conditions | PERFORMANCE performance | |
Moisture resistance DAMP & HEAT PROOF | Placed at a temperature of 40 ± 2 ° C, relative temperature After 48 hours from 90% to 95%, at room temperature Place it for 2 hours HAVING BEEN LEFT AT A TEMPERATURE OF 40±2°C AND HUMIDITY OF 90% ~ 95% RH FOR 48 HOURS, AND HUMIDITY FOR 1HOUR, AND THEN MEASUREMENT IS EFFECTED WITHEN 1 HOUR. | Contact resistance: 50mΩ or less CONTACT RESISTANCE: 50mΩ MAX Insulation resistance: 100MΩ or more INSULATION RESISTANCE: 100MΩ MIN Withstand voltage: AC 500V 1 sub-inside insulation will not break VOLTAGE PROOF: AC 500V IN 1 MINUTE VOT BREAKING INSULATION |
(5) SOLDER solder requirements: 1 temperature: 255 ± 5 ° C
2 time: 3 ± 0.5 seconds
3 effect: Dip the top of the terminal into the tin pool to a depth of 2mm, and more than 85% of the surface of the immersed part should be covered with tin.
(6) OPERATING TEMPERATURE RANGE Operating temperature range: -25°C-85°C
(7) OPERATING FORCE (GF) Force Specifications:
(8) PRODUCT CONSTRUCTION Product structure: (Additional drawings indicate the dimensions and dimensions)
Xiangjian Electronics Co., Ltd.
China*XiangJian Electrics Co., Ltd.
Acknowledgment
Specification For Approval
Oushida is second quality machine,but the quality also similar with longneng quality.only different is the Motor material. Longneng is 45# baosteel cold-rolled.Oushida is 60# cold-rolled baosteel.608 bearing use C&U.another one is scnc, another is CHL.
We have self machinery room to control the aluminium allowable error.We also removal the dust that every process machining to control no more tolerance on the spare.
There is testing room to control the quality stable.
OUSHIDA Rotary Hammers, OUSHIDA Rotary Hammer Drill, Cordless Rotary Hammer Drill, Air Rotary Hammer Drill, Pneumatic Rotary Hammer Drill
Yongkang Longneng Power Tools CO., LTD. , http://www.longnengtool.com