1. Before igniting the lamp, you can use alcohol cotton to erase the fingerprints left on the lamp to ensure the transparency of the lamp, so as not to weaken the luminous efficiency of the lamp.
2. The filament is brittle to avoid violent vibration and impact.
3. Be sure to connect the light switch to the fire line to avoid electric shock.
4. Other:
(1). When installing the iodine-tungsten bulb, please turn off the power and use a plastic sleeve to protect the bulb glass case from cleaning. Do not touch it with your hands. If you accidentally touch it, please wipe it off with alcohol.
(2). The iodine-tungsten bulb is made of high-temperature resistant quartz glass. If it is stained with hands or oil, it will make the quartz glass lose its luster, become white and cloudy, reduce the brightness, shorten the life and even break the glass shell.
(3 When the iodine tungsten lamp is lit, the temperature at the sealing point should not exceed 350 degrees, otherwise the life of the halogen bulb will be shortened, so the ventilation and heat dissipation of the halogen lamp must be good.
(4) When the iodine-tungsten lamp is lit, avoid blowing cold air directly to the bulb.
(5). In the iodine-tungsten lamp, avoid shock or vibration.
(6). After the iodine tungsten lamp is turned on or just turned off, the temperature of the lamp is still very high, and it is absolutely impossible to touch it by hand.
Hose Fittings,Hose Fittings And Adapters,Hose Fittings Etc,Combination & Joint Fittings
Rubber Tube, Pipe & Hose Co., Lt d , http://www.nbhoses.com