According to a report recently organized by the Physicists Organization Network, researchers at the Rensselaer Polytechnic Institute in the United States made the world's thinnest material, graphene, into a piece of paper and then shook it with the flash of a laser or camera flash. Perforated, resulting in an increase in the spacing of the internal structure of the sheet to allow more electrolyte to "wet" and lithium ions in lithium-ion batteries to achieve high-rate channel performance. This graphene anode material charges or discharges 10 times faster than the graphite anodes currently used in lithium-ion batteries and can drive electric vehicles in the future.
Rechargeable lithium-ion batteries are used as industry-specific products for a range of devices such as mobile phones, laptops and tablet computers, and electric vehicles. Lithium-ion batteries have a high energy density and can store large amounts of energy, but they cannot receive or release energy quickly when they encounter low power densities. To solve this problem, the nanomaterial specialist Nicky led the research team to create a new type of battery that can not only accommodate a large amount of energy, but also quickly receive and release energy.
According to the researchers, the main hurdle for lithium-ion battery technology is the limited power density and the inability to quickly receive or release large amounts of energy. This type of graphene paper battery, which is structurally "defective," can help overcome these obstacles. Once commercialized, this result will have a significant impact on the development of new batteries and electrical systems in electric vehicles and portable electronic products. The battery can also greatly reduce the time required for charging portable electronic devices such as mobile phones and laptops and responders.
The solution for the new battery is to create a large sheet of graphene oxide paper with a thickness equivalent to a piece of everyday printing paper, and can be made into any size or shape, and then expose the graphene paper to the laser and the digital camera flash Flash under. The heat of the laser or flash penetrates the paper and causes a slight explosion. The oxygen atoms in the graphene oxide are driven out of the structure. The graphene paper becomes devastated: numerous cracks, voids, voids, etc. The graphene paper is expanded by 5 times the thickness, thereby creating a large void in the single graphene sheet.
The researchers found that this damaged single-layer graphene paper can be used as an anode for lithium-ion batteries. Lithium ions use these cracks and pores as shortcuts, and they quickly move in and out of graphene, greatly increasing the overall power density of the battery. . They have experimentally demonstrated that the anode material charges or discharges 10 times faster than conventional anodes in lithium-ion batteries without causing a significant loss in its energy density, even after more than 1,000 charge/discharge cycles. . In addition, it is important that the high conductivity of the graphene sheet enables electrons to be efficiently transported at the anode.
The researchers said that these graphene paper anodes are easy to adjust, can be made to any size and shape, and exposing them to the flash of a laser or camera flash is a simple, inexpensive copying process. They will next pair high-power cathode materials with graphene anode materials to build a complete battery.
The results of this study were published in the recent issue of the American Chemical Society's ACS Nano. (Hua Ling)
Stone Wheel
Stone wheel is a special series,they are mainly used for grinding and polishing in small double edging machine,only one wheel can obtain good performance on arris.it can instead of Resin wheel,it has longer life than BD Arris Wheel.Many glass processing factories like this series because it can save much cost for them.
OD 100,130,150mm for your selection.
Quick Details:
Place of Origin: Jiangmen, China (Mainland)
Brand Name: LANSHI
Abrasive: New material
Size: standard size or custom size
Hole/Bore: 12 ,22,50,60,70 mm
Packaging & Delivery
Packaging Details: Carton.
Delivery Time Inner 3-5days .According to the quantity of your order
Frequently Asked Questions(FAQ)
1, Are you a manufacturer?
Yes,we are manufacturer since 1994, 23 years production experience.
2,Do you have the right of Export?
Yes,we have the right of Import and Export.
3,What`s your payment term?
T/T 30% deposit,T/T 70% before shipment.
4, What is the minimum order quantity?
No MOQ, Just 1 pcs for testing is acceptable.
5,Can you provide OEM?
Yes,we can produce as your drawing also we can printing on the wheels as your requirement.
6,which modes of transport can you provide?
As your request,we can arrange shipment by Express ,by air or by sea etc.
Any problems,please feel free the contact with me .Thank you!
Stone Wheel
Stone Wheel,Stone Polishing Wheel,Stone Polish Grinding Wheel,Stone Edge Polishing Wheels
LANBAO ABRASIVES CO.,LTD , http://www.lanbaoabrasives.com