TH-0100 RO Antiscalant And Dispersant
Properties:
TH-0100Â is a high-effective scale inhibitor, it is suitable for reverse osmose (RO), nanofiltration (NF) and ultrafiltration (UF) system. It can inhibit the scale deposit on membrane surface, improve water quality, lower operation expanse. This product has the following properties:
(1). Inhibit inorganic scale formation for a wide concentration span, the largest permitted LSI value is 2.8 when no acid is added.
 (2). Not flocculate with ferric oxide, aluminia oxide or silica oxide to form suspended substance;
(3). Inhibit the pollution from ferric, aluminium or heavy metals pollutants. The permitted ferric concentration for inlet water supply can reach to 8.0ppm.
(4). Inhibit the flocculate and deposit of silica, the permitted silica concentration for condense side can reach to 290ppm.
(5). Be used in CA, TFC, NF and UF membranes for RO system.
(6). Good solubility and stability.
(7). Effective in pH 5-10.
Â
Specification:
| Items | Index | |
|---|---|---|
| Appearance | Clear liquid | Clear transparent liquid |
| pH (1% water solution) | 1.5-2.5 | 1.5-2.5 |
| Density (20ºC)g/cm3 | 1.03-1.06 | 1.40-1.50 |
| Main content | Micromolecular containing P | Micromolecular containing P |
| Decomposition product under high temperature | orthophosphate | orthophosphate |
Package and Storage:
200L plastic drum, IBC(1000L), customers' requirement.
TH-0100 RO Antiscalant And Dispersant
Properties:
TH-0100Â is a high-effective scale inhibitor, it is suitable for reverse osmose (RO), nanofiltration (NF) and ultrafiltration (UF) system. It can inhibit the scale deposit on membrane surface, improve water quality, lower operation expanse. This product has the following properties:
(1). Inhibit inorganic scale formation for a wide concentration span, the largest permitted LSI value is 2.8 when no acid is added.
 (2). Not flocculate with ferric oxide, aluminia oxide or silica oxide to form suspended substance;
(3). Inhibit the pollution from ferric, aluminium or heavy metals pollutants. The permitted ferric concentration for inlet water supply can reach to 8.0ppm.
(4). Inhibit the flocculate and deposit of silica, the permitted silica concentration for condense side can reach to 290ppm.
(5). Be used in CA, TFC, NF and UF membranes for RO system.
(6). Good solubility and stability.
(7). Effective in pH 5-10.
Â
Specification:
| Items | Index | |
|---|---|---|
| Appearance | Clear liquid | Clear transparent liquid |
| pH (1% water solution) | 1.5-2.5 | 1.5-2.5 |
| Density (20ºC)g/cm3 | 1.03-1.06 | 1.40-1.50 |
| Main content | Micromolecular containing P | Micromolecular containing P |
| Decomposition product under high temperature | orthophosphate | orthophosphate |
Package and Storage:
200L plastic drum, IBC(1000L), customers' requirement.
Steel bends and steel elbows are both very common pipe fittings which are used to change the flowing direction in a piping systems. In addition to pipe fittings for connecting , elbow pipe also refers to a processing method. It is to Bend the straight pipe through the processing method to achieve the purpose of changing the circulation direction of the pipeline. The manufacturing process and the finished product are called pipe bend.
In order to ensure that the wall thickness of the bending part is no less than that of the straight pipe part, the minimum radius of the pipe bending should be 3D( the D means nominal diameter of this bend). The specific size depends on the operating conditions. That is to say, radius is not restricted as long as it exceeds 3D, which can be 3D or 3.2D, even 4D, 5D, 6D and 8D are also acceptable. In addition, the angle of the bend can be in any degree, some times there are also custom-designed bends which are 22.5 °, 45 °, 90 °, 135 °, 180 °, 270 ° and so on.
ASTM A105,A234 WPB,Pipe Fitting Bend
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.youlongpipe.com