Several key points for the maintenance of packaging machinery: cleaning, fastening, adjustment, lubrication, anti-corrosion. In the ordinary production process, each machine maintainer should do it. According to the maintenance manual and maintenance procedures of the machine packaging equipment, strictly carry out various maintenance work according to the specified period, reduce the wear speed of the parts, eliminate the hidden troubles of the fault, and prolong The life of the machine.
Maintenance is divided into: routine maintenance, regular maintenance (minute: primary maintenance, secondary maintenance, tertiary maintenance), special maintenance (point: for seasonal maintenance, disable maintenance).
Routine maintenance is centered on cleaning, lubrication, inspection and fastening. Routine maintenance is required as required during and after work.
The first-level maintenance work is carried out on the basis of routine maintenance. The key work is to lubricate, tighten and inspect all relevant parts and their cleaning work.
The secondary maintenance work focuses on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering and brake components.
The third-level maintenance focus is to detect, adjust, troubleshoot and balance the wear of each component. Diagnose and condition check the parts that affect the performance of the equipment and the parts with fault signs, and then complete the necessary replacement, adjustment and troubleshooting.
Seasonal maintenance means that the packaging equipment should focus on the detection and repair of components such as the combustion system, hydraulic system, cooling system and starting system before entering the summer and winter.
Discontinued maintenance means cleaning, cosmetic, supporting, anti-corrosion, etc. when the packaging equipment needs to be deactivated for a period of time due to seasonal factors (such as winter vacation).
Concerned about surprises
Label: daily maintenance of packaging machinery
Previous: NSK imported bearing installation, precautions for operation Next: How to solve the problem of vacuum cleaner blockage?
Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing.
Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.
Metal Pins,Stainless Steel Pins,Flange Alignment Pin,Safety Coupler Pin
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com