The renovation of the sofa is to replace the old leather or fabric sofa or leather sofa. If the shelf of the sofa is too long, the inside of the panel may be damaged by dampness, or the spring may be deformed or the sponge may collapse. This technique may be used to replace the planks with a spring-for-sponge or to reinforce the original shelf. The following Ouyifeng furniture will show you how sofas are refurbished and the simple steps for sofa renovation .
Need to adopt several phenomena of sofa renovation technology
(a) Sofa refurbishment techniques are required when there is a visible crack in the sofa skin.
(b) The use of sofa refurbishment technology is required when the exterior material of the sofa is damaged.
(3) The sofa appears "conspicuously" defaced, and a sofa refurbishment technique is required when there is odor.
(d) Sofa skins or fabrics appear to be damaged, and interior materials need to be exposed to sofa renovation techniques.
(5) The backrest and seat of the sofa have obvious collapses. When they sit down, they will touch the bottom layer. In the course of use, there will be sofa renovation techniques when there is a “click†noise.
(6) Sofa skin renewal technology is required when car lines burst.
Leather sofa renovation
First, bonding
Use a professional glue to glue the damaged part. If you lack a piece of leather, you have to stick a piece of it. After sticking it, try to use your hand to test the strength.
Second, fill the wound.
Use a blade to take the skin and apply a wound to the wound to scrape and flatten it, then use a hair dryer to speed up the drying (can be repeated several times properly to achieve the best effect) to prevent shrinking.
Third, color
1, color adjustment. Select the desired water-based color paddle and mix until the color is adjusted. Then use a sponge to dip the adjusted color paddle gently to the wound (hand-dragging wipe/coloring), spray with air compressor, and then use electricity afterwards. Hair blows for about 3 minutes. Ou Yifeng furniture recommendations can be properly repeated until satisfied.
2. Add a matting agent with a matt agent (2 in 1), wipe it with a sponge, then wipe it on the wound or spray it with an air compressor (better) and blow it dry. Repeat appropriately.
Fabric sofa renovation
If there is no serious wear and tear, the fabric sofa can be used to create a beautiful sofa cover. However, if the leather sofa is expensive at the time of purchase, it can be similarly refurbished to save the cost, while refurbishing the sofa and the new sofa. The difference is not great.
It usually takes about five to seven days for the combination of a set of five bits to be completed. Refurbish this technology to use waste, turn waste into treasure. And it can improve the service life and be more environmentally friendly. Refurbish a set of good leather sofas, with thick xipi, sustainable life of 3-5 years, and make up the peeling, change the fabric material sofa, the sustainable service life is 5 years, the first layer of thick yellow Cowhide, sustainable service life is around 8-12 years. Sofa refurbishment is a project of resource recycling and recycling, which is environmentally friendly and cost-effective.
The above is all about how the sofas are refurbished . To learn more about furniture, you can follow the GO Home Information Channel.
related articles
How to arrange the living room sofa sofa layout plan
How to match the furniture coffee table with sofa sofa should be how to match
How to make leather sofa repair leather sofa repair method recommended
Hook and loop sanding disc is also a classification of round sanding disc, it is also called self-adhesive sandpaper, which can be glued to the sanding disc tray and very convenient to use
Compared with Abrasive Fiber Disc , round disc hook and loop also can be a kind of Quick Change Disc , which is more convenient and cost-effective.
We use the high quality sandpaper rolls and total automatic Abrasive Sanding Disc punching machine, so the production ability is very enough and has ready stock.
Round sandpaper has the advantages of anti-clogging, anti-static, good flexibility, and high wear resistance.
Due to its wide range of uses, there are also many varieties of hook and loop sanding disc. The most commonly used are red sanding disc, yellow/gold sanding disc, green sanding disc, and white sanding disc, etc.
The sandpaper disc is using aluminum oxid abrasives, with grits as below: 40#, 60#, 80#, 120#, 180#, 240#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#.
The abrasive polishing disc can be punched into various shapes, round, round with holes, triangle, rectangle, iron shape, neckline shape, etc.
This product is round abrasive disc size: 100mm, 125mm, 150mm, 180mm, 225mm or other size can be customized.
The holes best selling is with 6 hole, 8 holes, 15 holes, 17 holes or customized.
We can also supply Abrasive Flap Disc , Flap Disc Backing Pad , Flap Disc Adhesive Glue, Flap Wheels , Abrasive Machine (Flap Disc Making Machine, Abrasive Belt Making Machine, Sanding Disc Machine , Flap Wheel Machine ), Cotton Buffing Wheels , Nylon/non-woven Surface Conditioning Products, Cutting Wheels , Grinding Wheels etc. If you are interested please feel free to contact us.
Hook And Loop Sanding Disc,5inch 8 hole sanding disc,Abrasive Sand Disc,Alumina Sanding Disc,Angle Grinder Sanding Disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com