[Emergency Rescue] High-altitude Rescue Accident Handling Pay Attention to Safety

News Related Keywords: No tags.

First, the type of high-altitude rescue:

1. Construction workers are trapped at work at height;

2. Social workers give birth (including military madmen);

Second, the use of knots with high safety factors to achieve high altitude rescue:

Two sets of waist, three sets of waist knots, coiled waist knots, double-wrapped double knots, straps and seats are connected in 6 different ways.

Third, high-altitude to save people's security risks:

Falls, electric shocks, and being attacked by suicidal people (including the madman).

Fourth, the use of ropes to carry out high-altitude rescue operations:

1. To secure cable fixing point and the fixing point of not less than two, rescue personnel embodiment not less than 2;

2. The ropes and knots must be intact and correct;

3. Conditional rescue personnel must wear a full body harness or half-strap;

4. The wire must be avoided during the rescue process.

Fifth, the use of high-lift vehicles to implement high-altitude rescue operations:

1. Avoid overhead wires;

2. The roadbed load and road width must meet the lifting requirements of the lift truck legs;

3. When the wind speed exceeds six levels, it is forbidden to implement high altitude rescue;

4. It is forbidden to overload during work.

5. The rescue personnel must carry out the fixation protection. ,

Sixth, the use of descending devices to save people's safety requirements:

1. Must be within the rated load range;

2. The descent device must be firmly attached;

3. Must be within the use altitude of the descent.

VII. Safeguarding Action for Saviors:

1. The rescue personnel must be self-protected to prevent accidents from slipping during the operation or being pushed and pulled with the rescued person;

2. The rescue equipment must be intact and meet the safety requirements;

3. Safety observers must be set up on the ground and unusual reports must be made promptly.

How to prevent being attacked by the madman in the rescue:

1. Keep a certain distance;

2. Be self-protected;

3. Divert the line of sight, attack the attack as a strategy;

4. Suddenly approached and succeeded.

Nine, the use of ropes to implement high-altitude rescue measures:

1. The rescue rope should not be less than two, and the diameter must be 12.7 millimeters (inclusive) or more;

2. The rope fixing point should be firm and not less than two, and the rescue personnel should be no less than two ;

3. When using rescuers themselves as fixed points, the number of persons shall not be less than 2 ;

4. At the top of the elevated tower and tower, 6 meters of self-restraint rope can be alternately fixed and protected.

X. Safety requirements when using rescue cushions to save people:

1. It is forbidden for firefighters to pick up directly before the person who has fallen to the air cushion;

2. When the drop falls on the edge of the air cushion, the escapee should be pushed laterally into the air cushion. Firefighters are prohibited from using the frontal body to block the fallen person.

The information in this article comes from the Internet and was reorganized and edited by China Rescue Equipment Network.

Emergency Sensor Light

The Emergency Sensor Light is specially designed for ceiling Mounted emergency lighting and with Microwave Sensor. from 12inch 18W to 18inch 36W. Dimmable lighting, Waterproof and Dustproof avialable. Widely using for Office and Household. Automatically light at once when buildings main power outage. It is more than 3 hours emergency time. When Main power is on, it use as an normal sensor lighting

Led Emergency Sensor Light,Emergency Light Sensor,Microwave Sensor Emergency Light,Emergency Sensor Light

Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com