Dongpeng tile in the service, most tile industry manufacturers pay more attention to pre-sale services, but most of the after-sales service to the product completely to the local dealer. In fact, from the perspective of overall brand operation, after-sales service is a very important link. It is not only the same as the quality of the product, it is an important connotation of the brand, and good after-sales service is an important way to upgrade the brand service and mass reputation. . Here we introduce three strokes to identify authentic Dongpeng tile quality.
1, how to look at the anti-counterfeiting mark: Dongpeng tile behind the service signs are Dongpeng tiles, 800 * 800 in the four corners are generally marked, decoration renderings, 300 * 300 mark in the middle. Of course, there will be some differences in the number of different styles of tags, but there will be some Dongpeng tile signs.
2, how to look at quality: brand tiles generally better quality, the same specifications of the brick, good brick weight. In addition, tile size, brick sound, tile water absorption, tile surface fineness, etc. can also determine the quality of the tile is good or bad, for how to identify the quality of tile is good or bad, the above has done a detailed classification introduced to remind consumers to wipe Bright eyes choose authentic Dongpeng ceramic tile with high quality and high service. The authentic quality and service of Dongpeng ceramic tile can be assured and eliminate fake and shoddy.
3, to the regular shop to buy: It is best to go to Dongpeng tile store to buy, that is not easy to be deceived, Dongpeng tile all over the agency, monopoly.
Tile Tiles Buy Dongpeng Tiles Tiles Category Tiles Specifications
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com