In the use of the heat carrier furnace, the heat carrier furnace and related equipment must be cleaned, measured, inspected, recorded, and the state of use of the heat carrier furnace must be known. The problems found should be dealt with in a timely manner according to the situation or incorporated into the periodic maintenance plan. The heat transfer oil furnace system handles every detail problem and can greatly extend the use time and effect of the heat transfer oil furnace and the RY type heat transfer oil pump.
First, lubrication work
According to the figure, the lubrication points are regularly refueled to ensure the normal operation of the running equipment.
Second, cleaning work
1. Do a good job of cleaning and sanitizing the heat carrier furnace room so that no debris is accumulated in the furnace room.
2. Keeping the heat carrier furnace and equipment clean and removing external ash can not only create a clean environment, but also easy to observe the operating status of the equipment, and find equipment hidden dangers.
3. The dust collector and the ash box are cleaned, usually two to three times per shift.
4. The heating furnace room should be kept in good lighting conditions.
5. Oil and gas furnaces should always erase the oil stains and accumulated dust on the burning surface, especially the vertical gas furnace. The top is not allowed to place flammable materials due to the high temperature.
Third, inspection work
1. There should be no fire or suction in the furnace of coal-fired heating furnaces. The steel structure of the furnace, the masonry and the furnace door should be in good condition to maintain the tightness of the furnace.
2. Conduct a patrol inspection of the furnace body and the coal stove hearth, grate and ancillary equipment, identify problems in time, and take corresponding measures.
3. Check the operation of each equipment, the transmission should be no noise. Coal-fired furnace grate speed control box coal machine hoisting machinery before deceleration of lubricating oil should be sufficient slag machine and induced draft fan should be full of lubricating oil, the fan cooling water should be connected.
4. Check that the values ​​of the pressure gauge, thermometer, and flow meter are at normal values ​​to determine the operating status of the boiler.
5. Check the use of heat transfer oil and the temperature of the high-level tank heat transfer oil. Do not exceed 70 °C to prevent coking and leakage.
Fourth, record work
Make the necessary records of the data (pressure, pressure difference, temperature, temperature difference) and the problems found in the inspection, and provide a basis for the judgment and treatment of future faults.
Concerned about surprises
Label: Daily maintenance of heat transfer oil furnace system can extend the use of RY type heat transfer oil pump
Previous: How to properly use and maintain the electronic balance Next: Sudden leakage of the CYZ self-priming centrifugal pump
PPGI Corrugated Sheet,Corrugated Roofing Sheets,Galvanized Corrugated Sheet,Clear Corrugated Roofing Sheets
SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyotoes.com