Nowadays, in order to withstand the cold air in winter, most people will put a bath in the bathroom to make our bath more comfortable, but some components will inevitably break down when they are used. For example, if it is a lamp, it will How to replace the bad? The following along with the small series to see if the bad bathroom lighting change it.
Yuba lighting is broken how to change
1, in the replacement, we must pay attention to safety, due to the relatively high installation of the lamp, it is recommended in the operation, as far as possible not to act alone, should be in the next person to help, in addition to change the lights also remember to power off.
2, first, the two Yuba lights should be removed, with a knife at the gap in the integrated board to take out an integrated board, the left hand into the lamp hole to the edge of the shell, right hand extended into the integrated top to find the part of the embedded bathroom heater shell Press down gently with both hands, and then use the same method to take the four corners, so that the bad lamp housing is removed.
3, after the product shell is removed, the middle of the bad light out, replaced with new lights, after the operation, you can put the Yuba shell aligned with the gap in the integrated board back, so that the Yuba lighting can be restored to use La.
Yuba lighting is broken how to change - Yuba lighting purchase points
1, security
Due to the need to use in wet places, so when choosing, try to choose a product with higher safety, and installation and after-sales service is also a part that can not be ignored. It is understood that brand products generally have one to three years of warranty, can be installed free of charge and come in for maintenance. .
2, bathroom area
At the time of purchase, you should understand the scope of your own bathroom. For example, a small bathroom is a large amount of water, so it is recommended to choose a product with good ventilation effect. In addition, the current design of Yuba is more targeted, so you can directly ask the salesperson The desired model.
Yuba lighting failure how to change - Yuba lighting maintenance
1. Generally speaking, the bathroom is relatively humid, and the Yuba is in this condition for a long time. It should be kept as dry as possible. If it is used for a long time, it must be cleaned regularly, and when it is clean, it can be stained with a small amount of neutral. Wipe with a clean cloth. After wiping, wipe with a dry cloth.
2, because the bathroom heater is an important part of the bathroom, so when it is a problem, we must remember that the first power, and then check, if you want to replace the circuit, it is recommended to contact the business or an electrician for maintenance, do not disassemble and repair.
Summary: The above is about how to change the content of the bad bathroom lighting , and hope to provide you with some help, if you encounter such problems in life later, may wish to try it yourself, Xiaobian believe that you can also become a home The repair master.
Scaffolding caster
Ningbo Mywin Caster Co., Ltd. , https://www.mywin-caster.com